[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [openrisc] GDB remote serial protocol and JTAG



But you could use an older version from the cvs. For example from 3 months
ago.

regards,
Damjan

----- Original Message -----
From: "Marko Mlinar" <markom@opencores.org>
To: <openrisc@opencores.org>
Sent: Wednesday, October 23, 2002 10:56 AM
Subject: Re: [openrisc] GDB remote serial protocol and JTAG


> On Wednesday 23 October 2002 12:29, javier_castillo_villar@yahoo.es wrote:
> > Hi:
> >
> >    I have a question about GDB protocol. I see that GDB comunicates
> > through the GDB remote serial protocol defined in the GDB manual but
> > while I take a look to the jp1 code and the or1ksim code I see that they
> > dont use these protocol to comunicate. They use some structs like
> > JTAGProxyWriteMessage and others. I was looking the GDB code but I
> > didnt see any traslation between GDB serial protocol and these protocol.
> > Is these translation in any GDB file? or1kGDB use remote serial
protocol?
>
>
> The or1ksim-gdb connection is currently broken, e.g. does not work (it was
not
> used for a long time).
> gdb-board connection works.
>
> See previous messages on this mailing list for more info.
>
> Both connections use some proprietary protocol to communicate over TCP/IP
and
> then connect to jp1 server. This is very deep subject and you will have to
> look in or1ksim/gdb specific files if you want to explore this.
>
> Marko
>
> --
> To unsubscribe from openrisc mailing list please visit
http://www.opencores.org/mailinglists.shtml
>

--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml