Login

jb · (Dieser Beitrag wurde zuletzt bearbeitet: 21.11.2016, 10:53 von jb.)

(17.11.2016, 22:35)Bleifuss2 schrieb: if the remote is dead, try restart lirc.

Code:
sudo stop lircd sudo start lircd

Hi again.

I have tried to restart lirc, but the remote does not work neither Sad

.

Which programs (software) shoud be running in order to make work the infrared port? How can I check that all of the sofware needed is running?

[Edited:]
The output of:

Code:

[email protected]:~$ dmesg | grep "irc"

is:

Code:
[    6.642920] lirc_dev: IR Remote Control driver registered, major 244 

[    6.650808] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0

[   17.450757] init: easyvdr-inputlirc main process (2068) killed by TERM signal

[   17.451206] init: easyvdr-irmplircd main process (2069) killed by TERM signal

[   17.475774] init: lircd-transmitter main process (2093) killed by TERM signal

and the output of:

Code:

[email protected]:~$ dmesg | grep "cir"

is:

Code:
[    6.562763] ite_cir: Auto-detected model: ITE8713 CIR transceiver

[    6.562767] ite_cir: Using model: ITE8713 CIR transceiver

[    6.562769] ite_cir: TX-capable: 1

[    6.562771] ite_cir: Sample period (ns): 8680

[    6.562773] ite_cir: TX carrier frequency (Hz): 38000

[    6.562774] ite_cir: TX duty cycle (%): 33

[    6.562776] ite_cir: RX low carrier frequency (Hz): 0

[    6.562777] ite_cir: RX high carrier frequency (Hz): 0

[    6.650658] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input4

[    6.650808] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0

[    6.650842] ite_cir: driver has been successfully loaded

Regards.
Javier B.

jb · 21.11.2016, 15:03

Hi again.

As I achieved to start with the remote working 1 time of 15 this morning, I recorded an easyvdrinfo file with remote working and without working, in case some difference between them can help to solve de issue.

I upload the two files in this post.

Regards.
Javier B.

jb · (Dieser Beitrag wurde zuletzt bearbeitet: 22.11.2016, 11:02 von jb.)

Hi. I give you more info when remote is not working:

Code:
cat /proc/bus/input/devices

returns:

Code:
I: Bus=0019 Vendor=0000 Product=0003 Version=0000

N: Name="Sleep Button"

P: Phys=PNP0C0E/button/input0

S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0

U: Uniq=

H: Handlers=kbd event0 

B: PROP=0

B: EV=3

B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000

N: Name="Power Button"

P: Phys=PNP0C0C/button/input0

S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1

U: Uniq=

H: Handlers=kbd event1 

B: PROP=0

B: EV=3

B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000

N: Name="Power Button"

P: Phys=LNXPWRBN/button/input0

S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

U: Uniq=

H: Handlers=kbd event2 

B: PROP=0

B: EV=3

B: KEY=10000000000000 0

I: Bus=0019 Vendor=1283 Product=0000 Version=0000

N: Name="ITE8713 CIR transceiver"

P: Phys=

S: Sysfs=/devices/virtual/rc/rc0/input3

U: Uniq=

H: Handlers=kbd event3 

B: PROP=0

B: EV=100013

B: KEY=fff 0 108fc326 217604100000000 0 118000 418000000801 9e968000000000 10000000

B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000

N: Name="MCE IR Keyboard/Mouse (ite-cir)"

P: Phys=/input0

S: Sysfs=/devices/virtual/input/input4

U: Uniq=

H: Handlers=sysrq kbd mouse0 event4 

B: PROP=0

B: EV=100017

B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe

B: REL=3

B: MSC=10

I: Bus=0003 Vendor=046d Product=404d Version=0111

N: Name="Logitech K400 Plus"

P: Phys=usb-0000:00:14.0-4:1

S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5

U: Uniq=

H: Handlers=sysrq kbd mouse1 event5 leds 

B: PROP=0

B: EV=12001f

B: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 ffff0001 130f938b17c007 ffff7bfad941dfff febeffdfffefffff fffffffffffffffe

B: REL=1c3

B: ABS=100000000

B: MSC=10

B: LED=1f

I: Bus=0019 Vendor=0000 Product=0006 Version=0000

N: Name="Video Bus"

P: Phys=LNXVIDEO/video/input0

S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6

U: Uniq=

H: Handlers=kbd event6 

B: PROP=0

B: EV=3

B: KEY=3e000b00000000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000

N: Name="HDA Intel PCH Mic"

P: Phys=ALSA

S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input7

U: Uniq=

H: Handlers=event7 

B: PROP=0

B: EV=21

B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000

N: Name="HDA Intel PCH Headphone"

P: Phys=ALSA

S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input8

U: Uniq=

H: Handlers=event8 

B: PROP=0

B: EV=21

B: SW=4

I: Bus=0000 Vendor=0000 Product=0000 Version=0000

N: Name="HDA Intel PCH HDMI/DP,pcm=3"

P: Phys=ALSA

S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input9

U: Uniq=

H: Handlers=event9 

B: PROP=0

B: EV=21

B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000

N: Name="HDA Intel PCH HDMI/DP,pcm=7"

P: Phys=ALSA

S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input10

U: Uniq=

H: Handlers=event10 

B: PROP=0

B: EV=21

B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000

N: Name="HDA Intel PCH HDMI/DP,pcm=8"

P: Phys=ALSA

S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input11

U: Uniq=

H: Handlers=event11 

B: PROP=0

B: EV=21

B: SW=140

I: Bus=0003 Vendor=2304 Product=0237 Version=0100

N: Name="IR-receiver inside an USB DVB receiver"

P: Phys=usb-0000:00:14.0-1.1/ir0

S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12

U: Uniq=

H: Handlers=kbd event12 

B: PROP=0

B: EV=100013

B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc

B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100

N: Name="IR-receiver inside an USB DVB receiver"

P: Phys=usb-0000:00:14.0-1.2/ir0

S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13

U: Uniq=

H: Handlers=kbd event13 

B: PROP=0

B: EV=100013

B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc

B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100

N: Name="IR-receiver inside an USB DVB receiver"

P: Phys=usb-0000:00:14.0-1.3/ir0

S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14

U: Uniq=

H: Handlers=kbd event14 

B: PROP=0

B: EV=100013

B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc

B: MSC=10

Code:
cat /etc/udev/rules.d/01-easyvdr-remote.rules

returns inside this:

Code:
#KERNELS=="input*", ATTRS{name}=="Budget-CI dvb ir receiver", SYMLINK+="input/ir-budgetCI"

#BUS=="usb", ATTRS{product}=="Griffin PowerMate", KERNEL=="event*", SYMLINK="input/powermate"

#KERNEL=="event*", SUBSYSTEM=="input", ATTRS{idVendor}=="15c2", ATTRS{idProduct}=="0034", SYMLINK+="input/touchscreen"

#KERNEL=="event*", SUBSYSTEM=="input", ATTRS{idVendor}=="0eef", ATTRS{idProduct}=="0001", SYMLINK+="input/touchscreen"

#BUS=="usb", KERNEL=="hiddev?", ATTRS{idVendor}=="0fe9", ATTRS{idProduct}=="9010", SYMLINK+="usb/DVICO"

#KERNEL=="lirc[0-9]*", NAME="lirc%n", SYMLINK=="lirc%n", MODE=="0666"

KERNEL=="event*", ATTRS{name}=="ITE8713 CIR transceiver", SYMLINK+="input/ir-auto_dtc", GROUP="vdr" # inserted_by_easyvdr-detect

Code:

[email protected]:~$ sudo ls -l /dev/input/

returns:

Code:
Total 0

drwxr-xr-x 2 root root     80 nov 22 09:45 by-id

drwxr-xr-x 2 root root    140 nov 22 09:46 by-path

crw-r----- 1 root root 13, 64 nov 22 09:45 event0

crw-r----- 1 root root 13, 65 nov 22 09:45 event1

crw-r----- 1 root root 13, 74 nov 22 09:46 event10

crw-r----- 1 root root 13, 75 nov 22 09:46 event11

crw-r----- 1 root root 13, 76 nov 22 09:46 event12

crw-r----- 1 root root 13, 77 nov 22 09:46 event13

crw-r----- 1 root root 13, 78 nov 22 09:46 event14

crw-r----- 1 root root 13, 66 nov 22 09:45 event2

crw-r----- 1 root vdr  13, 67 nov 22 09:45 event3

crw-r----- 1 root root 13, 68 nov 22 09:45 event4

crw-r----- 1 root root 13, 69 nov 22 09:45 event5

crw-r----- 1 root root 13, 70 nov 22 09:45 event6

crw-r----- 1 root root 13, 71 nov 22 09:45 event7

crw-r----- 1 root root 13, 72 nov 22 09:45 event8

crw-r----- 1 root root 13, 73 nov 22 09:46 event9

lrwxrwxrwx 1 root root      6 nov 22 09:45 ir-auto_dtc -> event3

crw-r----- 1 root root 13, 63 nov 22 09:45 mice

crw-r----- 1 root root 13, 32 nov 22 09:45 mouse0

crw-r----- 1 root root 13, 33 nov 22 09:45 mouse1

and

Code:

[email protected]:~$ udevadm info -a -p $(udevadm info -q path -n /dev/input/event3)

returns

Code:
Udevadm info starts with the device specified by the devpath and then

walks up the chain of parent devices. It prints for every device

found, all possible attributes in the udev rules key format.

A rule to match, can be composed by the attributes of the device

and the attributes from one single parent device.

  looking at device '/devices/virtual/rc/rc0/input3/event3':

    KERNEL=="event3"

    SUBSYSTEM=="input"

    DRIVER==""

  looking at parent device '/devices/virtual/rc/rc0/input3':

    KERNELS=="input3"

    SUBSYSTEMS=="input"

    DRIVERS==""

    ATTRS{name}=="ITE8713 CIR transceiver"

    ATTRS{phys}==""

    ATTRS{uniq}==""

    ATTRS{properties}=="0"

  looking at parent device '/devices/virtual/rc/rc0':

    KERNELS=="rc0"

    SUBSYSTEMS=="rc"

    DRIVERS==""

    ATTRS{protocols}=="other unknown rc-5 nec [rc-6] jvc sony rc-5-sz sanyo sharp mce_kbd xmp [lirc]"

Can that gives you an aditional clue?

Regards.
Javier B.

jb · (Dieser Beitrag wurde zuletzt bearbeitet: 22.11.2016, 11:43 von jb.)

Other outputs here:

Code:
udevadm info -a -p $(udevadm info -q path -n /dev/input/event12)

returns:

Code:
Udevadm info starts with the device specified by the devpath and then

walks up the chain of parent devices. It prints for every device

found, all possible attributes in the udev rules key format.

A rule to match, can be composed by the attributes of the device

and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12/event12':

    KERNEL=="event12"

    SUBSYSTEM=="input"

    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12':

    KERNELS=="input12"

    SUBSYSTEMS=="input"

    DRIVERS==""

    ATTRS{name}=="IR-receiver inside an USB DVB receiver"

    ATTRS{phys}=="usb-0000:00:14.0-1.1/ir0"

    ATTRS{uniq}==""

    ATTRS{properties}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1':

    KERNELS=="rc1"

    SUBSYSTEMS=="rc"

    DRIVERS==""

    ATTRS{protocols}=="[rc-5] nec rc-6"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1':

    KERNELS=="1-1.1"

    SUBSYSTEMS=="usb"

    DRIVERS=="usb"

    ATTRS{bDeviceSubClass}=="00"

    ATTRS{bDeviceProtocol}=="00"

    ATTRS{devpath}=="1.1"

    ATTRS{idVendor}=="2304"

    ATTRS{speed}=="480"

    ATTRS{bNumInterfaces}==" 1"

    ATTRS{bConfigurationValue}=="1"

    ATTRS{bMaxPacketSize0}=="64"

    ATTRS{busnum}=="1"

    ATTRS{devnum}=="4"

    ATTRS{configuration}==""

    ATTRS{bMaxPower}=="500mA"

    ATTRS{authorized}=="1"

    ATTRS{bmAttributes}=="a0"

    ATTRS{bNumConfigurations}=="1"

    ATTRS{maxchild}=="0"

    ATTRS{bcdDevice}=="0100"

    ATTRS{avoid_reset_quirk}=="0"

    ATTRS{quirks}=="0x0"

    ATTRS{serial}=="0000000M9CM1PQK"

    ATTRS{version}==" 2.00"

    ATTRS{urbnum}=="891213"

    ATTRS{ltm_capable}=="no"

    ATTRS{manufacturer}=="Pinnacle"

    ATTRS{removable}=="unknown"

    ATTRS{idProduct}=="0237"

    ATTRS{bDeviceClass}=="00"

    ATTRS{product}=="PCTV 73e"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1':

    KERNELS=="1-1"

    SUBSYSTEMS=="usb"

    DRIVERS=="usb"

    ATTRS{bDeviceSubClass}=="00"

    ATTRS{bDeviceProtocol}=="01"

    ATTRS{devpath}=="1"

    ATTRS{idVendor}=="2109"

    ATTRS{speed}=="480"

    ATTRS{bNumInterfaces}==" 1"

    ATTRS{bConfigurationValue}=="1"

    ATTRS{bMaxPacketSize0}=="64"

    ATTRS{busnum}=="1"

    ATTRS{devnum}=="2"

    ATTRS{configuration}==""

    ATTRS{bMaxPower}=="0mA"

    ATTRS{authorized}=="1"

    ATTRS{bmAttributes}=="e0"

    ATTRS{bNumConfigurations}=="1"

    ATTRS{maxchild}=="4"

    ATTRS{bcdDevice}=="9090"

    ATTRS{avoid_reset_quirk}=="0"

    ATTRS{quirks}=="0x0"

    ATTRS{version}==" 2.10"

    ATTRS{urbnum}=="49"

    ATTRS{ltm_capable}=="no"

    ATTRS{manufacturer}=="VIA Labs, Inc.         "

    ATTRS{removable}=="removable"

    ATTRS{idProduct}=="2812"

    ATTRS{bDeviceClass}=="09"

    ATTRS{product}=="USB2.0 Hub             "

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':

    KERNELS=="usb1"

    SUBSYSTEMS=="usb"

    DRIVERS=="usb"

    ATTRS{bDeviceSubClass}=="00"

    ATTRS{bDeviceProtocol}=="01"

    ATTRS{devpath}=="0"

    ATTRS{idVendor}=="1d6b"

    ATTRS{speed}=="480"

    ATTRS{bNumInterfaces}==" 1"

    ATTRS{bConfigurationValue}=="1"

    ATTRS{bMaxPacketSize0}=="64"

    ATTRS{authorized_default}=="1"

    ATTRS{busnum}=="1"

    ATTRS{devnum}=="1"

    ATTRS{configuration}==""

    ATTRS{bMaxPower}=="0mA"

    ATTRS{authorized}=="1"

    ATTRS{bmAttributes}=="e0"

    ATTRS{bNumConfigurations}=="1"

    ATTRS{maxchild}=="12"

    ATTRS{interface_authorized_default}=="1"

    ATTRS{bcdDevice}=="0404"

    ATTRS{avoid_reset_quirk}=="0"

    ATTRS{quirks}=="0x0"

    ATTRS{serial}=="0000:00:14.0"

    ATTRS{version}==" 2.00"

    ATTRS{urbnum}=="108"

    ATTRS{ltm_capable}=="no"

    ATTRS{manufacturer}=="Linux 4.4.0-45-generic xhci-hcd"

    ATTRS{removable}=="unknown"

    ATTRS{idProduct}=="0002"

    ATTRS{bDeviceClass}=="09"

    ATTRS{product}=="xHCI Host Controller"

  looking at parent device '/devices/pci0000:00/0000:00:14.0':

    KERNELS=="0000:00:14.0"

    SUBSYSTEMS=="pci"

    DRIVERS=="xhci_hcd"

    ATTRS{irq}=="122"

    ATTRS{subsystem_vendor}=="0x8086"

    ATTRS{broken_parity_status}=="0"

    ATTRS{class}=="0x0c0330"

    ATTRS{driver_override}=="(null)"

    ATTRS{consistent_dma_mask_bits}=="64"

    ATTRS{dma_mask_bits}=="64"

    ATTRS{local_cpus}=="f"

    ATTRS{device}=="0x9d2f"

    ATTRS{enable}=="1"

    ATTRS{msi_bus}=="1"

    ATTRS{local_cpulist}=="0-3"

    ATTRS{vendor}=="0x8086"

    ATTRS{subsystem_device}=="0x2063"

    ATTRS{numa_node}=="-1"

    ATTRS{d3cold_allowed}=="1"

  looking at parent device '/devices/pci0000:00':

    KERNELS=="pci0000:00"

    SUBSYSTEMS==""

    DRIVERS==""

Code:
udevadm info -a -p $(udevadm info -q path -n /dev/input/event13)

returns:

Code:
Udevadm info starts with the device specified by the devpath and then

walks up the chain of parent devices. It prints for every device

found, all possible attributes in the udev rules key format.

A rule to match, can be composed by the attributes of the device

and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13/event13':

    KERNEL=="event13"

    SUBSYSTEM=="input"

    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13':

    KERNELS=="input13"

    SUBSYSTEMS=="input"

    DRIVERS==""

    ATTRS{name}=="IR-receiver inside an USB DVB receiver"

    ATTRS{phys}=="usb-0000:00:14.0-1.2/ir0"

    ATTRS{uniq}==""

    ATTRS{properties}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2':

    KERNELS=="rc2"

    SUBSYSTEMS=="rc"

    DRIVERS==""

    ATTRS{protocols}=="[rc-5] nec rc-6"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2':

    KERNELS=="1-1.2"

    SUBSYSTEMS=="usb"

    DRIVERS=="usb"

    ATTRS{bDeviceSubClass}=="00"

    ATTRS{bDeviceProtocol}=="00"

    ATTRS{devpath}=="1.2"

    ATTRS{idVendor}=="2304"

    ATTRS{speed}=="480"

    ATTRS{bNumInterfaces}==" 1"

    ATTRS{bConfigurationValue}=="1"

    ATTRS{bMaxPacketSize0}=="64"

    ATTRS{busnum}=="1"

    ATTRS{devnum}=="6"

    ATTRS{configuration}==""

    ATTRS{bMaxPower}=="500mA"

    ATTRS{authorized}=="1"

    ATTRS{bmAttributes}=="a0"

    ATTRS{bNumConfigurations}=="1"

    ATTRS{maxchild}=="0"

    ATTRS{bcdDevice}=="0100"

    ATTRS{avoid_reset_quirk}=="0"

    ATTRS{quirks}=="0x0"

    ATTRS{serial}=="0000000M8CI1LE9"

    ATTRS{version}==" 2.00"

    ATTRS{urbnum}=="888347"

    ATTRS{ltm_capable}=="no"

    ATTRS{manufacturer}=="Pinnacle"

    ATTRS{removable}=="unknown"

    ATTRS{idProduct}=="0237"

    ATTRS{bDeviceClass}=="00"

    ATTRS{product}=="PCTV 73e"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1':

    KERNELS=="1-1"

    SUBSYSTEMS=="usb"

    DRIVERS=="usb"

    ATTRS{bDeviceSubClass}=="00"

    ATTRS{bDeviceProtocol}=="01"

    ATTRS{devpath}=="1"

    ATTRS{idVendor}=="2109"

    ATTRS{speed}=="480"

    ATTRS{bNumInterfaces}==" 1"

    ATTRS{bConfigurationValue}=="1"

    ATTRS{bMaxPacketSize0}=="64"

    ATTRS{busnum}=="1"

    ATTRS{devnum}=="2"

    ATTRS{configuration}==""

    ATTRS{bMaxPower}=="0mA"

    ATTRS{authorized}=="1"

    ATTRS{bmAttributes}=="e0"

    ATTRS{bNumConfigurations}=="1"

    ATTRS{maxchild}=="4"

    ATTRS{bcdDevice}=="9090"

    ATTRS{avoid_reset_quirk}=="0"

    ATTRS{quirks}=="0x0"

    ATTRS{version}==" 2.10"

    ATTRS{urbnum}=="49"

    ATTRS{ltm_capable}=="no"

    ATTRS{manufacturer}=="VIA Labs, Inc.         "

    ATTRS{removable}=="removable"

    ATTRS{idProduct}=="2812"

    ATTRS{bDeviceClass}=="09"

    ATTRS{product}=="USB2.0 Hub             "

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':

    KERNELS=="usb1"

    SUBSYSTEMS=="usb"

    DRIVERS=="usb"

    ATTRS{bDeviceSubClass}=="00"

    ATTRS{bDeviceProtocol}=="01"

    ATTRS{devpath}=="0"

    ATTRS{idVendor}=="1d6b"

    ATTRS{speed}=="480"

    ATTRS{bNumInterfaces}==" 1"

    ATTRS{bConfigurationValue}=="1"

    ATTRS{bMaxPacketSize0}=="64"

    ATTRS{authorized_default}=="1"

    ATTRS{busnum}=="1"

    ATTRS{devnum}=="1"

    ATTRS{configuration}==""

    ATTRS{bMaxPower}=="0mA"

    ATTRS{authorized}=="1"

    ATTRS{bmAttributes}=="e0"

    ATTRS{bNumConfigurations}=="1"

    ATTRS{maxchild}=="12"

    ATTRS{interface_authorized_default}=="1"

    ATTRS{bcdDevice}=="0404"

    ATTRS{avoid_reset_quirk}=="0"

    ATTRS{quirks}=="0x0"

    ATTRS{serial}=="0000:00:14.0"

    ATTRS{version}==" 2.00"

    ATTRS{urbnum}=="108"

    ATTRS{ltm_capable}=="no"

    ATTRS{manufacturer}=="Linux 4.4.0-45-generic xhci-hcd"

    ATTRS{removable}=="unknown"

    ATTRS{idProduct}=="0002"

    ATTRS{bDeviceClass}=="09"

    ATTRS{product}=="xHCI Host Controller"

  looking at parent device '/devices/pci0000:00/0000:00:14.0':

    KERNELS=="0000:00:14.0"

    SUBSYSTEMS=="pci"

    DRIVERS=="xhci_hcd"

    ATTRS{irq}=="122"

    ATTRS{subsystem_vendor}=="0x8086"

    ATTRS{broken_parity_status}=="0"

    ATTRS{class}=="0x0c0330"

    ATTRS{driver_override}=="(null)"

    ATTRS{consistent_dma_mask_bits}=="64"

    ATTRS{dma_mask_bits}=="64"

    ATTRS{local_cpus}=="f"

    ATTRS{device}=="0x9d2f"

    ATTRS{enable}=="1"

    ATTRS{msi_bus}=="1"

    ATTRS{local_cpulist}=="0-3"

    ATTRS{vendor}=="0x8086"

    ATTRS{subsystem_device}=="0x2063"

    ATTRS{numa_node}=="-1"

    ATTRS{d3cold_allowed}=="1"

  looking at parent device '/devices/pci0000:00':

    KERNELS=="pci0000:00"

    SUBSYSTEMS==""

    DRIVERS==""

Code:
udevadm info -a -p $(udevadm info -q path -n /dev/input/event14)

returns:

Code:
Udevadm info starts with the device specified by the devpath and then

walks up the chain of parent devices. It prints for every device

found, all possible attributes in the udev rules key format.

A rule to match, can be composed by the attributes of the device

and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14/event14':

    KERNEL=="event14"

    SUBSYSTEM=="input"

    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14':

    KERNELS=="input14"

    SUBSYSTEMS=="input"

    DRIVERS==""

    ATTRS{name}=="IR-receiver inside an USB DVB receiver"

    ATTRS{phys}=="usb-0000:00:14.0-1.3/ir0"

    ATTRS{uniq}==""

    ATTRS{properties}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3':

    KERNELS=="rc3"

    SUBSYSTEMS=="rc"

    DRIVERS==""

    ATTRS{protocols}=="[rc-5] nec rc-6"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3':

    KERNELS=="1-1.3"

    SUBSYSTEMS=="usb"

    DRIVERS=="usb"

    ATTRS{bDeviceSubClass}=="00"

    ATTRS{bDeviceProtocol}=="00"

    ATTRS{devpath}=="1.3"

    ATTRS{idVendor}=="2304"

    ATTRS{speed}=="480"

    ATTRS{bNumInterfaces}==" 1"

    ATTRS{bConfigurationValue}=="1"

    ATTRS{bMaxPacketSize0}=="64"

    ATTRS{busnum}=="1"

    ATTRS{devnum}=="8"

    ATTRS{configuration}==""

    ATTRS{bMaxPower}=="500mA"

    ATTRS{authorized}=="1"

    ATTRS{bmAttributes}=="a0"

    ATTRS{bNumConfigurations}=="1"

    ATTRS{maxchild}=="0"

    ATTRS{bcdDevice}=="0100"

    ATTRS{avoid_reset_quirk}=="0"

    ATTRS{quirks}=="0x0"

    ATTRS{serial}=="0000000M09S0BEU"

    ATTRS{version}==" 2.00"

    ATTRS{urbnum}=="919865"

    ATTRS{ltm_capable}=="no"

    ATTRS{manufacturer}=="Pinnacle"

    ATTRS{removable}=="unknown"

    ATTRS{idProduct}=="0237"

    ATTRS{bDeviceClass}=="00"

    ATTRS{product}=="PCTV 73e"

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1':

    KERNELS=="1-1"

    SUBSYSTEMS=="usb"

    DRIVERS=="usb"

    ATTRS{bDeviceSubClass}=="00"

    ATTRS{bDeviceProtocol}=="01"

    ATTRS{devpath}=="1"

    ATTRS{idVendor}=="2109"

    ATTRS{speed}=="480"

    ATTRS{bNumInterfaces}==" 1"

    ATTRS{bConfigurationValue}=="1"

    ATTRS{bMaxPacketSize0}=="64"

    ATTRS{busnum}=="1"

    ATTRS{devnum}=="2"

    ATTRS{configuration}==""

    ATTRS{bMaxPower}=="0mA"

    ATTRS{authorized}=="1"

    ATTRS{bmAttributes}=="e0"

    ATTRS{bNumConfigurations}=="1"

    ATTRS{maxchild}=="4"

    ATTRS{bcdDevice}=="9090"

    ATTRS{avoid_reset_quirk}=="0"

    ATTRS{quirks}=="0x0"

    ATTRS{version}==" 2.10"

    ATTRS{urbnum}=="49"

    ATTRS{ltm_capable}=="no"

    ATTRS{manufacturer}=="VIA Labs, Inc.         "

    ATTRS{removable}=="removable"

    ATTRS{idProduct}=="2812"

    ATTRS{bDeviceClass}=="09"

    ATTRS{product}=="USB2.0 Hub             "

  looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':

    KERNELS=="usb1"

    SUBSYSTEMS=="usb"

    DRIVERS=="usb"

    ATTRS{bDeviceSubClass}=="00"

    ATTRS{bDeviceProtocol}=="01"

    ATTRS{devpath}=="0"

    ATTRS{idVendor}=="1d6b"

    ATTRS{speed}=="480"

    ATTRS{bNumInterfaces}==" 1"

    ATTRS{bConfigurationValue}=="1"

    ATTRS{bMaxPacketSize0}=="64"

    ATTRS{authorized_default}=="1"

    ATTRS{busnum}=="1"

    ATTRS{devnum}=="1"

    ATTRS{configuration}==""

    ATTRS{bMaxPower}=="0mA"

    ATTRS{authorized}=="1"

    ATTRS{bmAttributes}=="e0"

    ATTRS{bNumConfigurations}=="1"

    ATTRS{maxchild}=="12"

    ATTRS{interface_authorized_default}=="1"

    ATTRS{bcdDevice}=="0404"

    ATTRS{avoid_reset_quirk}=="0"

    ATTRS{quirks}=="0x0"

    ATTRS{serial}=="0000:00:14.0"

    ATTRS{version}==" 2.00"

    ATTRS{urbnum}=="108"

    ATTRS{ltm_capable}=="no"

    ATTRS{manufacturer}=="Linux 4.4.0-45-generic xhci-hcd"

    ATTRS{removable}=="unknown"

    ATTRS{idProduct}=="0002"

    ATTRS{bDeviceClass}=="09"

    ATTRS{product}=="xHCI Host Controller"

  looking at parent device '/devices/pci0000:00/0000:00:14.0':

    KERNELS=="0000:00:14.0"

    SUBSYSTEMS=="pci"

    DRIVERS=="xhci_hcd"

    ATTRS{irq}=="122"

    ATTRS{subsystem_vendor}=="0x8086"

    ATTRS{broken_parity_status}=="0"

    ATTRS{class}=="0x0c0330"

    ATTRS{driver_override}=="(null)"

    ATTRS{consistent_dma_mask_bits}=="64"

    ATTRS{dma_mask_bits}=="64"

    ATTRS{local_cpus}=="f"

    ATTRS{device}=="0x9d2f"

    ATTRS{enable}=="1"

    ATTRS{msi_bus}=="1"

    ATTRS{local_cpulist}=="0-3"

    ATTRS{vendor}=="0x8086"

    ATTRS{subsystem_device}=="0x2063"

    ATTRS{numa_node}=="-1"

    ATTRS{d3cold_allowed}=="1"

  looking at parent device '/devices/pci0000:00':

    KERNELS=="pci0000:00"

    SUBSYSTEMS==""

    DRIVERS==""

Code:
ps aux | grep "lircd"

returns

Code:
root      2247  0.0  0.0  33112  3868 ?        Ss   10:39   0:00 /usr/sbin/lircd -n --output=/var/run/lirc/lircd --driver=devinput --device=/dev/input/ir-auto_dtc

Javier B.

Bleifuss2 · 23.11.2016, 09:49

Hello Javier

First we musst check what's the right event, and if it work's allways.
You can test with this command:

Code:
sudo cat /dev/input/event3

If you press a button on the remote control you must see any output on the terminal.

I'm not sure that event3 ist the right event.

Here can you look for the event number:

Zitat:H: Handlers=sysrq kbd mouse0 event4

Zitat:I: Bus=0019 Vendor=1283 Product=0000 Version=0000
N: Name="ITE8713 CIR transceiver"
P: Phys=
S: Sysfs=/devices/virtual/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 108fc326 217604100000000 0 118000 418000000801 9e968000000000 10000000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (ite-cir)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=sysrq kbd mouse0 event4
B: PROP=0
B: EV=100017
B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.3/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

Good luck

Bleifuss

jb · 23.11.2016, 11:17

Hi.

I have tested the whole bunch of events, with no luck in any of them:

Code:

[email protected]:~$ sudo cat /dev/input/event3

[sudo] password for easyvdr: 

[email protected]:~$ irw

[email protected]:~$ sudo cat /dev/input/event12

[email protected]:~$ sudo cat /dev/input/event13

[email protected]:~$ sudo cat /dev/input/event14

[email protected]:~$ sudo cat /dev/input/event2

[email protected]:~$ sudo cat /dev/input/event4

[email protected]:~$ sudo cat /dev/input/event5

[email protected]:~$ sudo cat /dev/input/event6

[email protected]:~$ sudo cat /dev/input/event7

[email protected]:~$ sudo cat /dev/input/event8

[email protected]:~$ sudo cat /dev/input/event9

[email protected]:~$ sudo cat /dev/input/event10

[email protected]:~$ sudo cat /dev/input/event11

[email protected]:~$ sudo cat /dev/input/event0

[email protected]:~$ sudo cat /dev/input/event1

[email protected]:~$ sudo cat /dev/input/event3

[email protected]:~$ sudo cat /dev/input/ir-auto_dtc 

[email protected]:~$ sudo cat /dev/input/mice 

[email protected]:~$ sudo cat /dev/input/mouse0

[email protected]:~$ sudo cat /dev/input/mouse1

Those commands did not return anything when I pressed the remote keys.

Regards.
Javier B.

jb · (Dieser Beitrag wurde zuletzt bearbeitet: 23.11.2016, 11:27 von jb.)

Hi again.

May be I just have found out what is happening.

After booting, I have connected by ssh and I have run those commands:

Code:

[email protected]:~$ sudo modprobe -r ite_cir 

[email protected]:~$ sudo modprobe ite_cir

And... the remote started working as it should be.

Someone has any idea about how to make the solution persistent after reboot?

Thanks and regards
Javier B.

Bleifuss2 · (Dieser Beitrag wurde zuletzt bearbeitet: 23.11.2016, 21:34 von Bleifuss2.)

Zitat:Someone has any idea about how to make the solution persistent after reboot?

OK that's no Problem, but where is the error?

Please post this file form both installations:

Code:
/etc/lirc/hardware.conf

jb · 24.11.2016, 10:22

(23.11.2016, 15:22)Bleifuss2 schrieb: Please post this file form both installations:

Code:
/etc/lirc/hardware.conf

Hi.

Here you have. But they seem equals in both systems.

Regards.
Javier B.

Bleifuss2 · 25.11.2016, 20:19

Hello Javier

I think you need a workaround ...

Code:
sudo su

echo modprobe -r ite_cir >/usr/share/vdr/before-vdr-hooks/1-reloadite_cir

echo modprobe ite_cir >>/usr/share/vdr/before-vdr-hooks/1-reloadite_cir

chmod ugo+x /usr/share/vdr/before-vdr-hooks/1-reloadite_cir

I hope it works

Thank you for your help

Regards

Bleifuss

jb · (Dieser Beitrag wurde zuletzt bearbeitet: 26.11.2016, 15:12 von jb.)

(25.11.2016, 20:19)Bleifuss2 schrieb: I think you need a workaround ...

Code:
sudo su echo modprobe -r ite_cir >/usr/share/vdr/before-vdr-hooks/1-reloadite_cir echo modprobe ite_cir >>/usr/share/vdr/before-vdr-hooks/1-reloadite_cir chmod ugo+x /usr/share/vdr/before-vdr-hooks/1-reloadite_cir

Hi, Bleifuss2.
With this workaround easyvdr starts till the screen with the easyvdr boot logo. Remote works, but I can not whatch tv. I only can change to Kodi with pChanger, but if I try to return to vdr, nothing is showed.

I tried this workaround also, and it seem to work. I added in "/etc/rc.local" this:

Code:
sleep 3

modprobe -r ite_cir

sleep 2

modprobe ite_cir

But I do not know if this workaround is permanent, can you tell me if it can be erased/restored (rc.local) after some update?

Thanks a lot and regards.
Javier B.

**Oberlooser** · 26.11.2016, 20:12

Hello
Nice that it is now with you running
For whoever gave up has already lost
greeting
Oberlooser
K +

mango · (Dieser Beitrag wurde zuletzt bearbeitet: 26.11.2016, 20:36 von mango.)

Hi Javier,

(26.11.2016, 15:09)jb schrieb: But I do not know if this workaround is permanent, can you tell me if it can be erased/restored (rc.local) after some update?

rc.local is permanent - after upgrade will not erased!

Regards
Wolfgang

Login
Benutzername:
Passwort:	Passwort vergessen?
	Merken