Wol aktivieren

[masterpete]

Hi,
Ich habe ein Gigabyte board und möchte wake on LAN aktivieren. Habe ich eine Chance?

Code:

Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1969_1091
Unique ID: rBUF.DunhqfG45E5
Parent ID: QSNP.xpwxxKVOE11
SysFS ID: /devices/pci0000:00/0000:00:1c.4/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Attansic Ethernet controller"
Vendor: pci 0x1969 "Attansic Technology Corp."
Device: pci 0x1091
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xe000
Revision: 0x10
Driver: "alx"
Driver Modules: "alx"
Device File: eth0
Memory Range: 0xf7100000-0xf713ffff (rw,non-prefetchable)
I/O Ports: 0xd000-0xdfff (rw)
IRQ: 44 (55516 events)
HW Address: 90:2b:34:a6:dd:f9
Link detected: yes
Module Alias: "pci:v00001969d00001091sv00001458sd0000E000bc02sc00i00"
Driver Info #0:
Driver Status: alx is active
Driver Activation Cmd: "modprobe alx"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)