[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [openrisc] Error compiling or1ksim on freeBSD 4.7




For this one issue the command:

automake --add-missing

It should work

Or maybe "touch" Makefiles so make wont try to recreate them.  (Why is it
trying?? I don't understand...)

On Thu, 31 Oct 2002 javier_castillo_villar@yahoo.es wrote:

>
> Hi:
>
>    The error was I use make all and I have to use gmake but when I
> use it I obtain another error. It says it dont find ./depcomp
>
> config.status: creating cpu/Makefile
> config.status: executing default-1 commands
> config.status: executing default commands
> gmake[2]: Leaving directory `/usr/home/meleth/or1k/or1ksim/cpu'
> gmake[2]: Entering directory `/usr/home/meleth/or1k/or1ksim/cpu'
> Making all in common
> gmake[3]: Entering directory
> `/usr/home/meleth/or1k/or1ksim/cpu/common'
> cd ../.. && automake --gnu cpu/common/Makefile
> automake: configure.in: required file `./depcomp' not found
> gmake[3]: *** [Makefile.in] Error 1
> gmake[3]: Leaving directory
> `/usr/home/meleth/or1k/or1ksim/cpu/common'
> gmake[2]: *** [all-recursive] Error 1
> gmake[2]: Leaving directory `/usr/home/meleth/or1k/or1ksim/cpu'
> gmake[1]: *** [all-recursive] Error 1
> gmake[1]: Leaving directory `/usr/home/meleth/or1k/or1ksim'
> gmake: *** [all] Error 2
>
>
>   Thanks
>
> ----- Original Message -----
> From: javier_castillo_villar@y...
> To: openrisc@o...
> Date: Thu, 31 Oct 2002 10:28:31 -0100
> Subject: [openrisc] Error compiling or1ksim on freeBSD 4.7
>
> >
> >
> > Hi:
> >
> >    I compile all the or1k tools over freebsd 4.7 but when I try to
> > make or1ksim after configuring it I obtain these error:
> >
> > Makefile", line 383: Need an operator
> > make: fatal errors encountered -- cannot continue
> >
> > Configure says this:
> >
> > ./configure --target=or32-uclinux --prefix=/opt/or32-uclinux
> > creating cache ./config.cache
> > checking host system type... i386-pc-freebsd4.7
> > checking target system type... or32-unknown-uclinux-gnu
> > checking build system type... i386-pc-freebsd4.7
> > checking for a BSD compatible install... /usr/bin/install -c
> > checking whether build environment is sane... yes
> > checking whether make sets ${MAKE}... yes
> > checking for working aclocal... found
> > checking for working autoconf... found
> > checking for working automake... found
> > checking for working autoheader... found
> > checking for working makeinfo... found
> > checking host system type... i386-pc-freebsd4.7
> > checking for gcc... gcc
> > checking whether the C compiler (gcc -g ) works... yes
> > checking whether the C compiler (gcc -g ) is a cross-compiler...
> no
> > checking whether we are using GNU C... yes
> > checking whether gcc accepts -g... yes
> > checking how to run the C preprocessor... gcc -E
> > checking for minix/config.h... no
> > checking whether make sets ${MAKE}... (cached) yes
> > checking whether gcc needs -traditional... no
> > checking for a BSD compatible install... /usr/bin/install -c
> > checking for ar... ar
> > checking for ranlib... ranlib
> > checking return type of signal handlers... void
> > checking whether stat file-mode macros are broken... no
> > checking for dirent.h that defines DIR... yes
> > checking for opendir in -ldir... no
> > checking for strcasecmp... yes
> > checking for select... yes
> > checking for setenv... yes
> > checking for putenv... yes
> > checking for tcgetattr... yes
> > checking for setlocale... yes
> > checking for lstat... yes
> > checking for working strcoll... yes
> > checking for unistd.h... yes
> > checking for stdlib.h... yes
> > checking for varargs.h... yes
> > checking for stdarg.h... yes
> > checking for string.h... yes
> > checking for sys/ptem.h... no
> > checking for sys/pte.h... no
> > checking for sys/stream.h... no
> > checking for sys/select.h... yes
> > checking for termcap.h... yes
> > checking for termios.h... yes
> > checking for termio.h... no
> > checking for sys/file.h... yes
> > checking for locale.h... yes
> > checking for net/ethernet.h... yes
> > checking whether to enable profiling... no
> > checking whether to compile fsim... no
> > checking whether to use simple execution... no
> > checking whether to enable ethernet phy emulation... no
> > checking whether to use raw range stats... no
> > checking whether instructions set overflow flag... no
> > checking whether arithmethic instructions set flag... no
> > checking for implementation-specific data... DEFAULT
> > configure: warning: using default environment
> > updating cache ./config.cache
> > creating ./config.status
> > creating Makefile
> > creating bpb/Makefile
> > creating cache/Makefile
> > creating cpu/Makefile
> > creating cpu/common/Makefile
> > creating cpu/or32/Makefile
> > creating cuc/Makefile
> > creating cpu/or1k/Makefile
> > creating cpu/dlx/Makefile
> > creating debug/Makefile
> > creating support/Makefile
> > creating mmu/Makefile
> > creating peripheral/Makefile
> > creating tick/Makefile
> > creating peripheral/channels/Makefile
> > creating pm/Makefile
> > creating pic/Makefile
> > creating debug/Makefile
> > creating vapi/Makefile
> > creating config.h
> >
> >
> > Thanks
> >
> --
> To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml
>

--------------------------------------------------------------
"Coffee should be black as hell, strong as death, and sweet as love."
				-Turkish Proverb

--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml