Gelöst: 1. Videopartition nachträglich mounten

[SurfaceCleanerZ]

Hi,
grr, keine Ahnung, warum jetzt nicht mehr mountfähig plötzlich:
Meine fstab sieht so aus:

Code:

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=5a98fe71-2f1f-4ac3-a982-b16f178af119  /  ext4  noatime,errors=remount-ro  0  1
# swap was on /dev/sda3 during installation
UUID=abf44dcd-6eeb-40cb-a267-d674a71706a4 none            swap    sw              0       0
#
# /media/easyvdr01/video0 was on /dev/sda4
UUID=5c0abcde-2e5d-4ec7-9e4e-f9ce73c9df3d  /media/easyvdr01/video0  xfs  noatime,defaults  0  2

# /media/easyvdr01/video0 was on /dev/sda4
# UUID=449eb70c-ce73-40e7-99f8-31c70163f099  /media/easyvdr01/filme1  xfs  noatime,defaults  0  2

So lief er, bevor ich den letzten Block ergänzt hatte )ohne #). Dann reboot und es ging, alles kopiert und dann ging nix.

Dann # davor, reboot und trotzdem nix...

Code:

Jan 10 19:30:54 easyVDR easyvdr-x-launcher: start
Jan 10 19:30:54 easyVDR dbus[838]: [system] Activating service name='org.freedesktop.RealtimeKit1' (using servicehelper)
Jan 10 19:30:54 easyVDR dbus[838]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Jan 10 19:30:54 easyVDR rtkit-daemon[2058]: Successfully called chroot.
Jan 10 19:30:54 easyVDR rtkit-daemon[2058]: Successfully dropped privileges.
Jan 10 19:30:54 easyVDR rtkit-daemon[2058]: Successfully limited resources.
Jan 10 19:30:54 easyVDR rtkit-daemon[2058]: Running.
Jan 10 19:30:54 easyVDR rtkit-daemon[2058]: Watchdog thread running.
Jan 10 19:30:54 easyVDR rtkit-daemon[2058]: Canary thread running.
Jan 10 19:30:54 easyVDR rtkit-daemon[2058]: Successfully made thread 2056 of process 2056 (n/a) owned by '2000' high priority at nice level -11.
Jan 10 19:30:54 easyVDR rtkit-daemon[2058]: Supervising 1 threads of 1 processes of 1 users.
Jan 10 19:30:54 easyVDR easyvdr-set-monitor-layout: set HDMI-0 --mode 1920x1080 --rate 50.0
Jan 10 19:30:54 easyVDR easyvdr-set-x-settings.desktop: xhost +
Jan 10 19:30:54 easyVDR easyvdr-set-x-settings.desktop: setxkbmap -display :0 de
Jan 10 19:30:54 easyVDR easyvdr-set-x-settings.desktop: screensaver off xset -dpms && xset s off
Jan 10 19:30:54 easyVDR easyvdr-x-lib-pulseaudio: set pulseaudio sink
Jan 10 19:30:54 easyVDR NetworkManager[1126]:  Policy set 'Kabelnetzwerkverbindung 1' (eth0) as default for IPv6 routing and DNS.
Jan 10 19:30:54 easyVDR NetworkManager[1126]:  Writing DNS information to /sbin/resolvconf
Jan 10 19:30:54 easyVDR dnsmasq[1774]: vorgelagerte Server von DBus gesetzt
Jan 10 19:30:54 easyVDR dnsmasq[1774]: Benutze Namensserver 192.168.178.1#53
Jan 10 19:30:54 easyVDR dnsmasq[1774]: Benutze Namensserver fd00::e228:6dff:fe0f:2b40#53
Jan 10 19:30:54 easyVDR NetworkManager[1126]:  Activation (eth0) Stage 5 of 5 (IPv6 Commit) complete.
Jan 10 19:30:55 easyVDR rtkit-daemon[2058]: Successfully made thread 2103 of process 2056 (n/a) owned by '2000' RT at priority 5.
Jan 10 19:30:55 easyVDR rtkit-daemon[2058]: Supervising 2 threads of 1 processes of 1 users.
Jan 10 19:30:55 easyVDR rtkit-daemon[2058]: Successfully made thread 2106 of process 2106 (n/a) owned by '2000' high priority at nice level -11.
Jan 10 19:30:55 easyVDR rtkit-daemon[2058]: Supervising 3 threads of 2 processes of 1 users.
Jan 10 19:30:55 easyVDR pulseaudio[2106]: [pulseaudio] pid.c: Daemon already running.
Jan 10 19:30:56 easyVDR easyvdr-x-launcher: end
Jan 10 19:30:56 easyVDR easyvdr-systemstart: set-monitor-layout
Jan 10 19:30:56 easyVDR easyvdr-set-monitor-layout: set HDMI-0 --mode 1920x1080 --rate 50.0
Jan 10 19:30:56 easyVDR easyvdr-systemstart: show easyvdr-logo
Jan 10 19:30:56 easyVDR NetworkManager[1126]:  WiFi hardware radio set enabled
Jan 10 19:30:56 easyVDR view-picture: start up
Jan 10 19:30:56 easyVDR easyvdr-systemstart: delay lircd 2 s
Jan 10 19:30:58 easyVDR easyvdr-systemstart: wait for remote 2 s
Jan 10 19:30:58 easyVDR lircd: Loading LIRC modules
Jan 10 19:30:58 easyVDR lircd-transmitter: Loading LIRC modules
Jan 10 19:30:58 easyVDR kernel: [   30.087362] init: lircd-transmitter main process (2169) killed by TERM signal
Jan 10 19:30:58 easyVDR lircd-0.9.0[2167]: lircd(atilibusb) ready, using /var/run/lirc/lircd
Jan 10 19:31:00 easyVDR easyvdr-systemstart: step 2/3 starting job easyvdr-vdr
Jan 10 19:31:00 easyVDR kernel: [   32.353424] init: easyvdr-inputlirc main process (2193) killed by TERM signal
Jan 10 19:31:00 easyVDR after-vdr-hooks: executing /usr/share/vdr/after-vdr-hooks/10_sound.restore
Jan 10 19:31:00 easyVDR after-vdr-hooks: executing /usr/share/vdr/after-vdr-hooks/20_system_update
Jan 10 19:31:00 easyVDR easyvdr-module-loader: starting graphlcd
Jan 10 19:31:00 easyVDR easyvdr-module-loader: GraphTFT wird nicht gestartet
Jan 10 19:31:00 easyVDR dvbstop: executing /usr/share/vdr/dvb-stop-hooks/10_dvb-stop.dvb
Jan 10 19:31:00 easyVDR dvbstart: executing /usr/share/vdr/dvb-start-hooks/10_dvb-start.dvb
Jan 10 19:31:01 easyVDR easyvdr-module-loader: wait for DVB Device 0.1s
Jan 10 19:31:01 easyVDR easyvdr-module-loader: Starting VDR
Jan 10 19:31:01 easyVDR vdr: [2782] ERROR: can't access /video0
Jan 10 19:31:01 easyVDR easyvdr-module-loader: VDR died within 10 seconds, this happened 1 time(s).
Jan 10 19:31:01 easyVDR easyvdr-module-loader: Terminating by error level 2
Jan 10 19:31:01 easyVDR after-vdr-hooks: executing /usr/share/vdr/after-vdr-hooks/30_test_setupplugin_running
Jan 10 19:31:01 easyVDR after-vdr-hooks: executing /usr/share/vdr/after-vdr-hooks/40_skinflatplus_refresh_weather
Jan 10 19:31:03 easyVDR after-vdr-hooks: executing /usr/share/vdr/after-vdr-hooks/99_disable-power-switch-rules
Jan 10 19:31:03 easyVDR kernel: [   35.314944] init: easyvdr-vdr post-start process (2211) terminated with status 1
Jan 10 19:31:04 easyVDR easyvdr-systemstart: wait for vdr

MfG,
Stefan

[SurfaceCleanerZ]

Hi,
ok gelöst:

PHP-Code:

chown -R vdr:vdr /media/easyvdr01 


half auch hier...

Da soll wer drauf kommen...

Dass sich die Rechte des Video0 Ordners ändern, wenn ich Aufnahmen rein kopiere... (rsynce)

MfG,
Stefan

[mango]

Hi Stefan,

Dass sich die Rechte des Video0 Ordners ändern, wenn ich Aufnahmen rein kopiere... (rsynce)

wenn du dies als root machst, sollte es ja klar sein das die Dateien nicht vdr gehören!
..oder du hängst die Platte für User vdr ein

Gruss
Wolfgang

[Oberlooser]

Neue Bilder in der Antwort #12 hinzu gefügt. Auf System Partition sda1   /  neu installieren ohne die Video Partition anzurühren..
Gruß Oberlooser