Source: ../../fea/mfea_proto_comm.hh
|
|
|
|
// -*- c-basic-offset: 4; tab-width: 8; indent-tabs-mode: t -*-
// Copyright (c) 2001-2005 International Computer Science Institute
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the "Software")
// to deal in the Software without restriction, subject to the conditions
// listed in the XORP LICENSE file. These conditions include: you must
// preserve this copyright notice, and you cannot mention the copyright
// holders in advertising related to the Software without their permission.
// The Software is provided WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED. This
// notice is a summary of the XORP LICENSE file; the license in that file is
// legally binding.
// $XORP: xorp/fea/mfea_proto_comm.hh,v 1.10 2005/03/25 02:53:11 pavlin Exp $
#ifndef __FEA_MFEA_PROTO_COMM_HH__
#define __FEA_MFEA_PROTO_COMM_HH__
//
// Multicast-related raw protocol communications.
//
#include "libxorp/xorp.h"
#include <sys/uio.h>
#include "libxorp/eventloop.hh"
#include "libproto/proto_unit.hh"
//
// Constants definitions
//
//
// Structures/classes, typedefs and macros
//
class MfeaNode;
/**
* @short A class for socket I/O communication.
*
* Each protocol 'registers' for socket I/O and gets assigned one object
* of this class.
*/
class ProtoComm : public ProtoUnit {
public:
/**
* Constructor for given MFEA node, IP protocol, and module ID
* (@ref xorp_module_id).
*
* @param mfea_node the MFEA node (@ref MfeaNode) this entry belongs to.
* @param ipproto the IP protocol number (e.g., IPPROTO_PIM for PIM).
* @param module_id the module ID (@ref xorp_module_id) for the protocol.
*/
ProtoComm(MfeaNode& mfea_node, int ipproto, xorp_module_id module_id);
/**
* Destructor
*/
virtual ~ProtoComm();
/**
* Start the @ref ProtoComm.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int start();
/**
* Stop the @ref ProtoComm.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int stop();
/**
* Get the IP protocol number.
*
* @return the IP protocol number.
*/
int ipproto() const { return (_ipproto); }
/**
* Get the protocol socket.
*
* The protocol socket is specific to the particular protocol of
* this entry.
*
* @return the socket value if valid, otherwise XORP_ERROR.
*/
int proto_socket() const { return (_proto_socket); }
/**
* Open an protocol socket.
*
* The protocol socket is specific to the particular protocol of
* this entry.
*
* @return the socket value on success, otherwise XORP_ERROR.
*/
int open_proto_socket();
/**
* Add the method to read from the protocol socket.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_proto_socket_selector();
/**
* Close the protocol socket.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int close_proto_socket();
/**
* Set/reset the "Header Included" option (for IPv4) on the protocol
* socket.
*
* If set, the IP header of a raw packet should be created
* by the application itself, otherwise the kernel will build it.
* Note: used only for IPv4.
* In RFC-3542, IPV6_PKTINFO has similar functions,
* but because it requires the interface index and outgoing address,
* it is of little use for our purpose. Also, in RFC-2292 this option
* was a flag, so for compatibility reasons we better not set it
* here; instead, we will use sendmsg() to specify the header's field
* values.
*
* @param enable_bool if true, set the option, otherwise reset it.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int ip_hdr_include(bool enable_bool);
/**
* Enable/disable receiving information about some of the fields
* in the IP header on the protocol socket.
*
* If enabled, values such as interface index, destination address and
* IP TTL (a.k.a. hop-limit in IPv6), and hop-by-hop options will be
* received as well.
* Note: used only for IPv6. In IPv4 we don't have this; the whole IP
* packet is passed to the application listening on a raw socket.
*
* @param enable_bool if true, set the option, otherwise reset it.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int recv_pktinfo(bool enable_bool);
/**
* Set the default TTL (or hop-limit in IPv6) for the outgoing multicast
* packets on the protocol socket.
*
* @param ttl the desired IP TTL (a.k.a. hop-limit in IPv6) value.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int set_multicast_ttl(int ttl);
/**
* Set/reset the "Multicast Loop" flag on the protocol socket.
*
* If the multicast loopback flag is set, a multicast datagram sent on
* that socket will be delivered back to this host (assuming the host
* is a member of the same multicast group).
*
* @param enable_bool if true, set the loopback, otherwise reset it.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int set_multicast_loop(bool enable_bool);
/**
* Set default interface for outgoing multicast on the protocol socket.
*
*
* @param vif_index the vif index of the interface to become the default
* multicast interface.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int set_default_multicast_vif(uint16_t vif_index);
/**
* Join a multicast group on an interface.
*
* @param vif_index the vif index of the interface to join the multicast
* group.
* @param group the multicast group to join.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int join_multicast_group(uint16_t vif_index, const IPvX& group);
/**
* Leave a multicast group on an interface.
*
* @param vif_index the vif index of the interface to leave the multicast
* group.
* @param group the multicast group to leave.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int leave_multicast_group(uint16_t vif_index, const IPvX& group);
/**
* Read data from a protocol socket, and then call the appropriate protocol
* module to process it.
*
* This is called as a SelectorList callback.
* @param fd file descriptor that with event caused this method to be
* called.
* @param m mask representing event type.
*/
void proto_socket_read(int fd, SelectorMask m);
/**
* Send a packet on a protocol socket.
*
* @param vif_index the vif index of the vif that will be used to send-out
* the packet.
* @param src the source address of the packet.
* @param dst the destination address of the packet.
* @param ip_ttl the TTL (a.k.a. Hop-limit in IPv6) of the packet.
* If it has a negative value, the TTL will be set here or by the
* lower layers.
* @param ip_tos the TOS (a.k.a. Traffic Class in IPv6) of the packet.
* If it has a negative value, the TOS will be set here or by the lower
* layers.
* @param is_router_alert if true, then the IP packet with the data
* should have the Router Alert option included.
* @param databuf the data buffer.
* @param datalen the length of the data in @ref databuf.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int proto_socket_write(uint16_t vif_index,
const IPvX& src, const IPvX& dst,
int ip_ttl, int ip_tos,
bool is_router_alert,
const uint8_t *databuf, size_t datalen);
/**
* Set/reset the flag whether to ignore the receiving my own packets.
*
* @param v if true, ignore my own packets on receiving, otherwise don't
* ignore them.
*/
void set_ignore_my_packets(bool v) { _ignore_my_packets = v; }
/**
* Get the module ID (@ref xorp_module_id) for the protocol that created
* this entry.
*
* @return the module ID (@ref xorp_module_id) of the protocol that created
* this entry.
*/
xorp_module_id module_id() const { return (_module_id); }
private:
// Private functions
MfeaNode& mfea_node() const { return (_mfea_node); }
bool ignore_my_packets() const { return (_ignore_my_packets); }
// Private state
MfeaNode& _mfea_node; // The MFEA node I belong to
int _ipproto; // The protocol number (IPPROTO_*)
xorp_module_id _module_id; // The corresponding module id (XORP_MODULE_*)
int _proto_socket; // The socket for protocol message
uint8_t* _rcvbuf0; // Data buffer0 for receiving
uint8_t* _sndbuf0; // Data buffer0 for sending
uint8_t* _rcvbuf1; // Data buffer1 for receiving
uint8_t* _sndbuf1; // Data buffer1 for sending
uint8_t* _rcvcmsgbuf; // Control recv info (IPv6 only)
uint8_t* _sndcmsgbuf; // Control send info (IPv6 only)
struct msghdr _rcvmh; // The msghdr structure used by recvmsg()
struct msghdr _sndmh; // The msghdr structure used by sendmsg()
struct iovec _rcviov[2]; // The rcvmh scatter/gatter array
struct iovec _sndiov[2]; // The sndmh scatter/gatter array
struct sockaddr_in _from4; // The source addr of recvmsg() msg (IPv4)
struct sockaddr_in _to4; // The dest. addr of sendmsg() msg (IPv4)
#ifdef HAVE_IPV6
struct sockaddr_in6 _from6; // The source addr of recvmsg() msg (IPv6)
struct sockaddr_in6 _to6; // The dest. addr of sendmsg() msg (IPv6)
#endif
bool _ignore_my_packets; // If true, ignore packets originated by me
};
//
// Global variables
//
//
// Global functions prototypes
//
#endif // __FEA_MFEA_PROTO_COMM_HH__
Generated by: pavlin on possum.icir.org on Wed Apr 13 21:53:05 2005, using kdoc $.
