Source: ../../libcomm/comm_api.h
|
|
|
|
/* -*- Mode:C; c-basic-offset:4; tab-width:8; indent-tabs-mode:t -*- */
/*
* Copyright (c) 2001
* YOID Project.
* University of Southern California/Information Sciences Institute.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* $XORP: xorp/libcomm/comm_api.h,v 1.2 2003/03/12 22:46:02 pavlin Exp $
*/
#ifndef __LIBCOMM_COMM_API_H__
#define __LIBCOMM_COMM_API_H__
/*
* COMM socket library API header.
*/
#include <sys/socket.h>
#include <netinet/in.h>
/*
* Constants definitions
*/
#define SO_RCV_BUF_SIZE_MIN (48*1024) /* min. rcv socket buf size */
#define SO_RCV_BUF_SIZE_MAX (256*1024) /* desired rcv socket buf size */
#define SO_SND_BUF_SIZE_MIN (48*1024) /* min. snd socket buf size */
#define SO_SND_BUF_SIZE_MAX (256*1024) /* desired snd socket buf size */
#define ADDR_PORT_REUSE_FLAG true
#ifndef AF_LOCAL
#define AF_LOCAL AF_UNIX /* XXX: AF_UNIX is the older name */
#endif
/*
* Structures, typedefs and macros
*/
#ifndef HTONS
#define HTONS(x) ((x) = htons((u_short)(x)))
#endif
#ifndef NTOHS
#define NTOHS(x) ((x) = ntohs((u_short)(x)))
#endif
#ifndef HTONL
#define HTONL(x) ((x) = htonl((u_long)(x)))
#endif
#ifndef NTOHL
#define NTOHL(x) ((x) = ntohl((u_long)(x)))
#endif
/*
* Global variables
*/
/*
* Global functions prototypes
*/
__BEGIN_DECLS
/*
* The high-level `user' API.
*/
/**
* Init stuff. Need to be called only once (during startup).
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_init(void);
/**
* Open a TCP socket.
*
* @param family the address family.
* @return the new socket on success, otherwsise XORP_ERROR.
*/
extern int comm_open_tcp(int family);
/**
* Open an UDP socket.
*
* @param family the address family.
* @return the new socket on success, otherwsise XORP_ERROR.
*/
extern int comm_open_udp(int family);
/**
* Close a socket.
*
* @param sock the socket to close.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_close(int sock);
/**
* Open an IPv4 TCP socket and bind it to a local address and a port.
*
* @param my_addr the local IPv4 address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the local port to bind to (in network order).
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_bind_tcp4(const struct in_addr *my_addr,
unsigned short my_port);
#ifdef HAVE_IPV6
/**
* Open an IPv6 TCP socket and bind it to a local address and a port.
*
* @param my_addr the local IPv6 address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the local port to bind to (in network order).
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_bind_tcp6(const struct in6_addr *my_addr,
unsigned short my_port);
#endif /* HAVE_IPV6 */
/**
* Open an IPv4 UDP socket and bind it to a local address and a port.
*
* @param my_addr the local IPv4 address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the local port to bind to (in network order).
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_bind_udp4(const struct in_addr *my_addr,
unsigned short my_port);
#ifdef HAVE_IPV6
/**
* Open an IPv6 UDP socket and bind it to a local address and a port.
*
* @param my_addr the local IPv6 address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the local port to bind to (in network order).
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_bind_udp6(const struct in6_addr *my_addr,
unsigned short my_port);
#endif /* HAVE_IPV6 */
/**
* Open an IPv4 UDP socket on an interface, bind it to a multicast address
* and a port, and join that multicast group.
*
* @param mcast_addr the multicast address to bind to and join.
*
* @param join_if_addr the local unicast interface address (in network order)
* to join the multicast group on. If it is NULL, the system will choose the
* interface each time a datagram is sent.
*
* @param my_port the port to bind to (in network order).
*
* @param reuse_flag if true, allow other sockets to bind to the same multicast
* address and port, otherwise disallow it.
*
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_bind_join_udp4(const struct in_addr *mcast_addr,
const struct in_addr *join_if_addr,
unsigned short my_port,
bool reuse_flag);
#ifdef HAVE_IPV6
/**
* Open an IPv6 UDP socket on an interface, bind it to a multicast address
* and a port, and join that multicast group.
*
* @param mcast_addr the multicast address to bind to and join.
*
* @param join_if_addr the local unicast interface index to join the multicast
* group on. If it is 0, the system will choose the interface each time a
* datagram is sent.
*
* @param my_port the port to bind to (in network order).
*
* @param reuse_flag if true, allow other sockets to bind to the same multicast
* address and port, otherwise disallow it.
*
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_bind_join_udp6(const struct in6_addr *mcast_addr,
uint join_if_addr,
unsigned short my_port,
bool reuse_flag);
#endif /* HAVE_IPV6 */
/**
* Open an IPv4 TCP socket, and connect it to a remote address and port.
* TODO: XXX: because it may take time to connect on a TCP socket,
* the return value actually is XORP_OK even though the connect did not
* complete.
*
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_connect_tcp4(const struct in_addr *remote_addr,
unsigned short remote_port);
#ifdef HAVE_IPV6
/**
* Open an IPv6 TCP socket, and connect it to a remote address and port.
*
* TODO: XXX: because it may take time to connect on a TCP socket,
* the return value actually is XORP_OK even though the connect did not
* complete.
*
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_connect_tcp6(const struct in6_addr *remote_addr,
unsigned short remote_port);
#endif /* HAVE_IPV6 */
/**
* Open an IPv4 UDP socket, and connect it to a remote address and port.
*
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_connect_udp4(const struct in_addr *remote_addr,
unsigned short remote_port);
#ifdef HAVE_IPV6
/**
* Open an IPv6 UDP socket, and connect it to a remote address and port.
*
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_connect_udp6(const struct in6_addr *remote_addr,
unsigned short remote_port);
#endif /* HAVE_IPV6 */
/**
* Open an IPv4 UDP socket, bind it to a local address and a port,
* and connect it to a remote address and port.
*
* @param local_addr the local address to bind to.
* If it is NULL, will bind to `any' local address.
* @param local_port the local port to bind to.
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_bind_connect_udp4(const struct in_addr *local_addr,
unsigned short local_port,
const struct in_addr *remote_addr,
unsigned short remote_port);
#ifdef HAVE_IPV6
/**
* Open an IPv6 UDP socket, bind it to a local address and a port,
* and connect it to a remote address and port.
*
* @param local_addr the local address to bind to.
* If it is NULL, will bind to `any' local address.
* @param local_port the local port to bind to.
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @return the new socket on success, otherwise XORP_ERROR.
*/
extern int comm_bind_connect_udp6(const struct in6_addr *local_addr,
unsigned short local_port,
const struct in6_addr *remote_addr,
unsigned short remote_port);
#endif /* HAVE_IPV6 */
/*
* The low-level `sock' API.
*/
/**
* Open a socket of domain = @ref domain, type = @ref type,
* and protocol = @protocol.
*
* The sending and receiving buffer size are set, and the socket
* itself is set to non-blocking, and with TCP_NODELAY (if a TCP socket).
*
* @param domain the domain of the socket (e.g., AF_INET, AF_INET6).
* @param type the type of the socket (e.g., SOCK_STREAM, SOCK_DGRAM).
* @param protocol the particular protocol to be used with the socket.
* @return the open socket on success, otherwise XORP_ERROR.
*/
extern int comm_sock_open(int domain, int type, int protocol);
/**
* Bind an IPv4 socket to an address and a port.
*
* @param sock the socket to bind.
* @param my_addr the address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the port to bind to (in network order).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_bind4(int sock, const struct in_addr *my_addr,
unsigned short my_port);
#ifdef HAVE_IPV6
/**
* Bind an IPv6 socket to an address and a port.
*
* @param sock the socket to bind.
* @param my_addr the address to bind to (in network order).
* If it is NULL, will bind to `any' local address.
* @param my_port the port to bind to (in network order).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_bind6(int sock, const struct in6_addr *my_addr,
unsigned short my_port);
#endif /* HAVE_IPV6 */
/**
* Join an IPv4 multicast group on a socket (and an interface).
*
* @param sock the socket to join the group.
* @param mcast_addr the multicast address to join.
* @param my_addr the local unicast address of an interface to join.
* If it is NULL, the interface is chosen by the kernel.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_join4(int sock, const struct in_addr *mcast_addr,
const struct in_addr *my_addr);
#ifdef HAVE_IPV6
/**
* Join an IPv6 multicast group on a socket (and an interface).
*
* @param sock he socket to join the group.
* @param mcast_addr the multicast address to join.
* @param my_ifindex the local unicast interface index to join.
* If it is 0, the interface is chosen by the kernel.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_join6(int sock, const struct in6_addr *mcast_addr,
unsigned int my_ifindex);
#endif /* HAVE_IPV6 */
/**
* Connect to a remote IPv4 address.
*
* XXX: We can use this not only for TCP, but for UDP sockets as well.
* TODO: XXX: because it may take time to connect on a TCP socket,
* the return value actually is XORP_OK even though the connect did not
* complete.
*
* @param sock the socket to use to connect.
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_connect4(int sock, const struct in_addr *remote_addr,
unsigned short remote_port);
#ifdef HAVE_IPV6
/**
* Connect to a remote IPv6 address.
*
* XXX: We can use this not only for TCP, but for UDP sockets as well.
* TODO: XXX: because it may take time to connect on a TCP socket,
* the return value actually is XORP_OK even though the connect did not
* complete.
*
* @param sock the socket to use to connect.
* @param remote_addr the remote address to connect to.
* @param remote_port the remote port to connect to.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_connect6(int sock,
const struct in6_addr *remote_addr,
unsigned short remote_port);
#endif /* HAVE_IPV6 */
/**
* Accept a connection on a listening socket.
*
* @param sock the listening socket to accept on.
* @return the accepted socket on success, otherwise XORP_ERROR.
*/
extern int comm_sock_accept(int sock);
/**
* Close a socket.
*
* @param sock the socket to close.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_sock_close(int sock);
/**
* Set/reset the TCP_NODELAY option on a TCP socket.
*
* @param sock the socket whose option we want to set/reset.
* @param val if non-zero, the option will be set, otherwise will be reset.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_nodelay(int sock, int val);
/**
* Set/reset the SO_REUSEADDR option on a socket.
*
* XXX: if the OS doesn't support this option, XORP_ERROR is returned.
*
* @param sock the socket whose option we want to set/reset.
* @param val if non-zero, the option will be set, otherwise will be reset.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_reuseaddr(int sock, int val);
/**
* Set/reset the SO_REUSEPORT option on a socket.
*
* XXX: if the OS doesn't support this option, XORP_ERROR is returned.
*
* @param sock the socket whose option we want to set/reset.
* @param val if non-zero, the option will be set, otherwise will be reset.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_reuseport(int sock, int val);
/**
* Set/reset the multicast loopback option on a socket.
*
* @param sock the socket whose option we want to set/reset.
* @param val if non-zero, the option will be set, otherwise will be reset.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_loopback(int sock, int val);
/**
* Set the TTL of the outgoing multicast packets on a socket.
*
* @param sock the socket whose TTL we want to set.
* @param val the TTL of the outgoing multicast packets.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_ttl(int sock, int val);
/**
* Set default interface for IPv4 outgoing multicast on a socket.
*
* @param sock the socket whose default multicast interface to set.
* @param in_addr the IPv4 address of the default interface to set.
* If @ref in_addr is NULL, the system will choose the interface each time
* a datagram is sent.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_iface4(int sock, const struct in_addr *in_addr);
#ifdef HAVE_IPV6
/**
* Set default interface for IPv6 outgoing multicast on a socket.
*
* @param sock the socket whose default multicast interface to set.
* @param ifindex the IPv6 interface index of the default interface to set.
* If @ref ifindex is 0, the system will choose the interface each time
* a datagram is sent.
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
extern int comm_set_iface6(int sock, u_int ifindex);
#endif /* HAVE_IPV6 */
/**
* Set the sending buffer size of a socket.
*
* @param sock the socket whose sending buffer size to set.
* @param desired_bufsize the preferred buffer size.
* @param min_bufsize the smallest acceptable buffer size.
* @return the successfully set buffer size on success,
* otherwise XORP_ERROR.
*/
extern int comm_sock_set_sndbuf(int sock, int desired_bufsize,
int min_bufsize);
/**
* Set the receiving buffer size of a socket.
*
* @param sock the socket whose receiving buffer size to set.
* @param desired_bufsize the preferred buffer size.
* @param min_bufsize the smallest acceptable buffer size.
* @return the successfully set buffer size on success,
* otherwise XORP_ERROR.
*/
extern int comm_sock_set_rcvbuf(int sock, int desired_bufsize,
int min_bufsize);
/**
* Get the address family of a socket.
*
* XXX: idea taken from W. Stevens' UNPv1, 2e (pp 109)
*
* @param sock the socket whose address family we need to get.
* @return the address family on success, otherwise XORP_ERROR.
*/
extern int socket2family(int sock);
__END_DECLS
#endif /* __LIBCOMM_COMM_API_H__ */
Generated by: pavlin on possum.icir.org on Mon Jun 9 13:23:49 2003, using kdoc 2.0a54+XORP. |