Re: [usb] status of USB 2.0 device IP core

[elite<liyicheng@yahoo.com>]

It's good ideal.unfortunately the synopsys' utmi_fz is used to 
verify your USB design, I think it can not be download to your
FPGA.



----- Original Message ----- 
From: "Heik H. Hellmich" <hellmich@m... > 
To: usb@o...  
Date: Tue, 04 Mar 2003 12:03:17 +0100 
Subject: [usb] status of USB 2.0 device IP core 

> 
> 
> Hello Rudi, 
> 
> I am really interested in using the USB 2.0 device IP core! 
> Currently, we are working on the design of an FPGA prototype board 
> and 
> we would like to use the USB interface to connect the board to a 
> host 
> machine (PC, workstation). 
> Now I would like to know how the status of the above mentioned IP 
> core 
> is? Are there still people working on it? I would really like to 
> participate in verifying the core. For this task we have installed 
> the 
> USB transceiver model "utmi_fz" from Synopsys. Now we would like to 
> connect the IP core to that transceiver and our internal on-chip 
> bus 
> which is Intel's PLB because our software is running on a 
> PowerPC-405 
> (macro block of Xilinx' Virtex-II-Pro FPGA). 
> Could you please tell us, if anyone else is working with the IP 
> core and 
> is intending to verify the functionality by downloading it onto an 
> FPGA? 
> Waiting for your reply! 
> 
> Regards, 
>   Heik 
> 
> -- 
> Heik Heinrich Hellmich             
> mailto:heik@m...  
> Technical University Berlin, TIME 
> Microelectronics Division, Sekr. EN 4       fon: +49 (0)30 314 
> 25682 
> Einsteinufer 17, D-10587 Berlin, Germany    fax: +49 (0)30 314 
> 24597 
> 
--
To unsubscribe from usb mailing list please visit http://www.opencores.org/mailinglists.shtml