Re: [bluetooth] Hi Puloma, Jamil and everbody

[Puloma Mukherjee <puloma@ece.sunysb.edu>]

HI,
I have implemented the following blocks at the behavioural level only and
tested it against the sample results provided in the bluetooth
specifications...

FEC
HEC
CRC

I was getting to the correlator bit but I have a few questions regarding
the same.As for the scrambler,are we talking about the encryption block or
the whitening block..?

 On Wed, 23 Apr 2003, Jamil Khatib wrote:

> 
> Hi,
> As I mentioned in my last email we have to divide the work so here are my
> suggestions for now
> 
> - FEC
> - CRC
> - HEC
> - Correlator ( I can update it)
> - Scrambler ( I can update it)
> - Clock managment (I'll do it if no one can)
> - Hop frequency
> - Other blocks: I do not know if they are stable
> Just let me know which blocks you like to work in so as to arrange
> everything
> 
> We need also a good test bench may be done by software so as to test our
> design and make sure that it is working. Can anyone try to search for any
> simulator that we can test our code against it?
> 
> 
> There is a file in bluetooth_bb module called contants_pkg.vhd please try to
> review it and make use of it and if you feel that other contants must be
> added there let me know.
> 
> I'll do my best to update the bluetooth design spec 
> 
> Note: You can download the old code from opencores CVS using bluetooth moudle
> while the latest design document at bluetooth_bb module
> 
> Please let me know how can we speed up the process
> 
> Regards,
> Jamil Khatib
> 
> On 4/21/2003, "anilnainwal@sofblueindia.com" <anilnainwal@sofblueindia.com>
> wrote:
> 
> >Hi Puloma
> >Ya I think it was me who contacted you earlier and ready to help you as
> >much as i can do.
> >
> >Dear Jamil
> >Now i think there are many people who are taking interest in this
> >project, so this is the high time to give it a boosting kick.
> >I am new to opencores, so i dont have much idea of implementing/
> >writing the codes here. I shall be obliged if you can help me in that, and
> >lets divide some work.
> >
> >Best Regards
> >Anil Nainwal
> >
> >----- Original Message -----
> >From: Puloma Mukherjee <puloma@e... >
> >To: bluetooth@o...
> >Date: Sat, 19 Apr 2003 12:46:27 -0400 (EDT)
> >Subject: Re: [bluetooth] Re: hi
> >
> >>
> >>
> >> Hi,
> >> Before this some one wrote to me to help me witht he project.I
> >> forgot who
> >> it was.please write back to confirm.
> >>
> >> On Fri, 18 Apr 2003 rtannous@u...  wrote:
> >>
> >> >
> >> > Hi .
> >> > I have done VHDL before. So I am not sure If I can be of any
> >> help. In
> >> > case this project is not completely dead. Email me back ..
> >> > regards,
> >> > Roland Tannous
> >> > ----- Original Message -----
> >> > From: "Jamil Khatib" <jamilkhatib@h... >
> >> > To: bluetooth@o...
> >> > anilnainwal@o...
> >> > Date: Tue, 08 Apr 2003 05:32:55 GMT
> >> > Subject: [bluetooth] Re: hi
> >> >
> >> > >
> >> > >
> >> > >
> >> > > Hi,
> >> > > In fact the project is freezed because I need someone to
> >> work
> >> > > with me on it specially in hte VHDL coding. Can you help?
> >> > >
> >> > > Regards,
> >> > > Jamil KHatib
> >> > > anilnainwal@o...  writes:
> >> > >
> >> > > > hi everbody
> >> > > > Can anyone tell me the present status of the
> >> bluetooth core. i
> >> > > would like
> >> > > > to join the group for the development of bluetooth.
> >> > > > pls tell me the status, i would like to work
> >> anywhere in the
> >> > > baseband.
> >> > > >
> >> > > > best regards
> >> > > > anil nainwal
> >> > > >
> >> > > >
> >> > >
> >> >
> >> >
> >>
> >--
> >To unsubscribe from bluetooth mailing list please visit
> http://www.opencores.org/mailinglists.shtml
> 
> --
> To unsubscribe from bluetooth mailing list please visit http://www.opencores.org/mailinglists.shtml
> 

--
To unsubscribe from bluetooth mailing list please visit http://www.opencores.org/mailinglists.shtml