# fmcsR: Mismatch Tolerant Maximum Common Substructure Detection for Advanced Compound Similarity Searching

Authors: Yan Wang, Tyler Backman, Kevin Horan, [Thomas Girke](mailto:thomas.girke@ucr.edu)

#### Last update: 19 May, 2021

#### Package

fmcsR 1.34.0

Note: the most recent version of this tutorial can be found here and a short overview slide show here.

# 1 Introduction

Maximum common substructure (MCS) algorithms rank among the most sensitive and accurate methods for measuring structural similarities among small molecules. This utility is critical for many research areas in drug discovery and chemical genomics. The MCS problem is a graph-based similarity concept that is defined as the largest substructure (sub-graph) shared among two compounds (Wang et al. 2013; Cao, Jiang, and Girke 2008). It fundamentally differs from the structural descriptor-based strategies like fingerprints or structural keys. Another strength of the MCS approach is the identification of the actual MCS that can be mapped back to the source compounds in order to pinpoint the common and unique features in their structures. This output is often more intuitive to interpret and chemically more meaningful than the purely numeric information returned by descriptor-based approaches. Because the MCS problem is NP-complete, an efficient algorithm is essential to minimize the compute time of its extremely complex search process. The `fmcsR` package implements an efficient backtracking algorithm that introduces a new flexible MCS (FMCS) matching strategy to identify MCSs among compounds containing atom and/or bond mismatches. In contrast to this, other MCS algorithms find only exact MCSs that are perfectly contained in two molecules. The details about the FMCS algorithm are described in the Supplementary Materials Section of the associated publication (Wang et al. 2013). The package provides several utilities to use the FMCS algorithm for pairwise compound comparisons, structure similarity searching and clustering. To maximize performance, the time consuming computational steps of `fmcsR` are implemented in C++. Integration with the `ChemmineR` package provides visualization functionalities of MCSs and consistent structure and substructure data handling routines (Cao et al. 2008; Backman, Cao, and Girke 2011). The following gives an overview of the most important functionalities provided by `fmcsR`.

# 2 Installation

The R software for running `fmcsR` and `ChemmineR` can be downloaded from CRAN (http://cran.at.r-project.org/). The `fmcsR` package can be installed from an open R session using the `BiocManager::install()` command.

    if (!requireNamespace("BiocManager", quietly=TRUE))
        install.packages("BiocManager")
    BiocManager::install("fmcsR")

# 3 Quick Overview

To demo the main functionality of the `fmcsR` package, one can load its sample data stored as `SDFset` object. The generic `plot` function can be used to visualize the corresponding structures.

    library(fmcsR)
    data(fmcstest)
    plot(fmcstest[1:3], print=FALSE)

The `fmcs` function computes the MCS/FMCS shared among two compounds, which can be highlighted in their structure with the `plotMCS` function.

    test <- fmcs(fmcstest[1], fmcstest[2], au=2, bu=1)
    plotMCS(test,regenCoords=TRUE)

# 4 Documentation

    library("fmcsR") # Loads the package

    library(help="fmcsR") # Lists functions/classes provided by fmcsR
    library(help="ChemmineR") # Lists functions/classes from ChemmineR
    vignette("fmcsR") # Opens this PDF manual
    vignette("ChemmineR") # Opens ChemmineR PDF manual

The help documents for the different functions and container classes can be accessed with the standard R help syntax.

    ?fmcs
    ?"MCS-class"
    ?"SDFset-class"

# 5 MCS of Two Compounds

## 5.1 Data Import

The following loads the sample data set provided by the `fmcsR` package. It contains the SD file (SDF) of 3 molecules stored in an `SDFset` object.

    data(fmcstest)
    sdfset <- fmcstest
    sdfset

    ## An instance of "SDFset" with 3 molecules

Custom compound data sets can be imported and exported with the `read.SDFset` and `write.SDF` functions, respectively. The following demonstrates this by exporting the `sdfset` object to a file named `sdfset.sdf`. The latter is then reimported into R with the `read.SDFset` function.

    write.SDF(sdfset, file="sdfset.sdf")
    mysdf <- read.SDFset(file="sdfset.sdf")

## 5.2 Compute MCS

The `fmcs` function accepts as input two molecules provided as `SDF` or `SDFset` objects. Its output is an S4 object of class `MCS`. The default printing behavior summarizes the MCS result by providing the number of MCSs it found, the total number of atoms in the query compound \(a\), the total number of atoms in the target compound \(b\), the number of atoms in their MCS \(c\) and the corresponding Tanimoto Coefficient. The latter is a widely used similarity measure that is defined here as \(c/(a+b-c)\). In addition, the Overlap Coefficient is provided, which is defined as \(c/min(a,b)\). This coefficient is often useful for detecting similarities among compounds with large size differences.

    mcsa <- fmcs(sdfset[[1]], sdfset[[2]])
    mcsa

    ## An instance of "MCS"
    ##  Number of MCSs: 7
    ##  CMP1: 14 atoms
    ##  CMP2: 33 atoms
    ##  MCS: 8 atoms
    ##  Tanimoto Coefficient: 0.20513
    ##  Overlap Coefficient: 0.57143

    mcsb <- fmcs(sdfset[[1]], sdfset[[3]])
    mcsb

    ## An instance of "MCS"
    ##  Number of MCSs: 1
    ##  CMP1: 14 atoms
    ##  CMP2: 25 atoms
    ##  MCS: 14 atoms
    ##  Tanimoto Coefficient: 0.56
    ##  Overlap Coefficient: 1

If `fmcs` is run with `fast=TRUE` then it returns the numeric summary information in a named `vector`.

    fmcs(sdfset[1], sdfset[2], fast=TRUE)

    ##           Query_Size          Target_Size             MCS_Size Tanimoto_Coefficient
    ##           14.0000000           33.0000000            8.0000000            0.2051282
    ##  Overlap_Coefficient
    ##            0.5714286

## 5.3 Class Usage

The `MCS` class contains three components named `stats`, `mcs1` and `mcs2`. The `stats` slot stores the numeric summary information, while the structural MCS information for the query and target structures is stored in the `mcs1` and `mcs2` slots, respectively. The latter two slots each contain a `list` with two subcomponents: the original query/target structures as `SDFset` objects as well as one or more numeric index vector(s) specifying the MCS information in form of the row positions in the atom block of the corresponding `SDFset`. A call to `fmcs` will often return several index vectors. In those cases the algorithm has identified alternative MCSs of equal size.

    slotNames(mcsa)

    ## [1] "stats" "mcs1"  "mcs2"

Accessor methods are provided to return the different data components of the `MCS` class.

    stats(mcsa) # or mcsa[["stats"]]

    ##           Query_Size          Target_Size             MCS_Size Tanimoto_Coefficient
    ##           14.0000000           33.0000000            8.0000000            0.2051282
    ##  Overlap_Coefficient
    ##            0.5714286

    mcsa1 <- mcs1(mcsa) # or mcsa[["mcs1"]]
    mcsa2 <- mcs2(mcsa) # or mcsa[["mcs2"]]
    mcsa1[1] # returns SDFset component

    ## $query
    ## An instance of "SDFset" with 1 molecules

    mcsa1[[2]][1:2] # return first two index vectors

    ## $CMP1_fmcs_1
    ## [1]  3  8  7  4  9  5 11  1
    ##
    ## $CMP1_fmcs_2
    ## [1]  3  8  7  4  9  5  1 13

The `mcs2sdfset` function can be used to return the substructures stored in an `MCS` instance as `SDFset` object. If `type='new'` new atom numbers will be assigned to the subsetted SDF, while `type='old'` will maintain the atom numbers from its source. For details consult the help documents `?mcs2sdfset` and `?atomsubset`.

    mcstosdfset <- mcs2sdfset(mcsa, type="new")
    plot(mcstosdfset[[1]], print=FALSE)

To construct an `MCS` object manually, one can provide the required data components in a `list`.

    mylist <- list(stats=stats(mcsa), mcs1=mcs1(mcsa), mcs2=mcs2(mcsa))
    as(mylist, "MCS")

    ## An instance of "MCS"
    ##  Number of MCSs: 7
    ##  CMP1: 14 atoms
    ##  CMP2: 33 atoms
    ##  MCS: 8 atoms
    ##  Tanimoto Coefficient: 0.20513
    ##  Overlap Coefficient: 0.57143

# 6 FMCS of Two Compounds

If `fmcs` is run with its default paramenters then it returns the MCS of two compounds, because the mismatch parameters are all set to zero. To identify FMCSs, one has to increase the number of upper bound atom mismatches `au` and/or bond mismatches `bu` to interger values above zero.

    plotMCS(fmcs(sdfset[1], sdfset[2], au=0, bu=0))

    plotMCS(fmcs(sdfset[1], sdfset[2], au=1, bu=1))

    plotMCS(fmcs(sdfset[1], sdfset[2], au=2, bu=2))

    plotMCS(fmcs(sdfset[1], sdfset[3], au=0, bu=0))

# 7 FMCS Search Functionality

The `fmcsBatch` function provides FMCS search functionality for compound collections stored in `SDFset` objects.

    data(sdfsample) # Loads larger sample data set
    sdf <- sdfsample
    fmcsBatch(sdf[1], sdf[1:30], au=0, bu=0)

    ##       Query_Size Target_Size MCS_Size Tanimoto_Coefficient Overlap_Coefficient
    ## CMP1          33          33       33            1.0000000           1.0000000
    ## CMP2          33          26       11            0.2291667           0.4230769
    ## CMP3          33          26       10            0.2040816           0.3846154
    ## CMP4          33          32        9            0.1607143           0.2812500
    ## CMP5          33          23       14            0.3333333           0.6086957
    ## CMP6          33          19       13            0.3333333           0.6842105
    ## CMP7          33          21        9            0.2000000           0.4285714
    ## CMP8          33          31        8            0.1428571           0.2580645
    ## CMP9          33          21        9            0.2000000           0.4285714
    ## CMP10         33          21        8            0.1739130           0.3809524
    ## CMP11         33          36       15            0.2777778           0.4545455
    ## CMP12         33          26       12            0.2553191           0.4615385
    ## CMP13         33          26       11            0.2291667           0.4230769
    ## CMP14         33          16       12            0.3243243           0.7500000
    ## CMP15         33          34       15            0.2884615           0.4545455
    ## CMP16         33          25        8            0.1600000           0.3200000
    ## CMP17         33          19        8            0.1818182           0.4210526
    ## CMP18         33          24       10            0.2127660           0.4166667
    ## CMP19         33          25       14            0.3181818           0.5600000
    ## CMP20         33          26       10            0.2040816           0.3846154
    ## CMP21         33          25       15            0.3488372           0.6000000
    ## CMP22         33          21       11            0.2558140           0.5238095
    ## CMP23         33          26       11            0.2291667           0.4230769
    ## CMP24         33          17        6            0.1363636           0.3529412
    ## CMP25         33          27        9            0.1764706           0.3333333
    ## CMP26         33          24       13            0.2954545           0.5416667
    ## CMP27         33          26       11            0.2291667           0.4230769
    ## CMP28         33          20       10            0.2325581           0.5000000
    ## CMP29         33          20        8            0.1777778           0.4000000
    ## CMP30         33          18        7            0.1590909           0.3888889

# 8 Clustering with FMCS

The `fmcsBatch` function can be used to compute a similarity matrix for clustering with various algorithms available in R. The following example uses the FMCS algorithm to compute a similarity matrix that is used for hierarchical clustering with the `hclust` function and the result is plotted in form of a dendrogram.

    sdf <- sdf[1:7]
    d <- sapply(cid(sdf), function(x) fmcsBatch(sdf[x], sdf, au=0, bu=0, matching.mode="aromatic")[,"Overlap_Coefficient"])
    d

    ##           CMP1      CMP2      CMP3      CMP4      CMP5      CMP6      CMP7
    ## CMP1 1.0000000 0.2307692 0.2307692 0.2812500 0.5217391 0.6842105 0.2857143
    ## CMP2 0.2307692 1.0000000 0.4230769 0.5384615 0.2173913 0.4736842 0.2857143
    ## CMP3 0.2307692 0.4230769 1.0000000 0.3076923 0.2173913 0.4736842 0.9047619
    ## CMP4 0.2812500 0.5384615 0.3076923 1.0000000 0.3043478 0.5263158 0.2857143
    ## CMP5 0.5217391 0.2173913 0.2173913 0.3043478 1.0000000 0.5789474 0.2380952
    ## CMP6 0.6842105 0.4736842 0.4736842 0.5263158 0.5789474 1.0000000 0.3157895
    ## CMP7 0.2857143 0.2857143 0.9047619 0.2857143 0.2380952 0.3157895 1.0000000

    hc <- hclust(as.dist(1-d), method="complete")
    plot(as.dendrogram(hc), edgePar=list(col=4, lwd=2), horiz=TRUE)

The FMCS shared among compound pairs of interest can be visualized with `plotMCS`, here for the two most similar compounds from the previous tree:

    plotMCS(fmcs(sdf[3], sdf[7], au=0, bu=0, matching.mode="aromatic"))

# 9 Version Information

     sessionInfo()

    ## R version 4.1.0 RC (2021-05-10 r80283)
    ## Platform: x86_64-w64-mingw32/x64 (64-bit)
    ## Running under: Windows Server x64 (build 17763)
    ##
    ## Matrix products: default
    ##
    ## locale:
    ## [1] LC_COLLATE=C                           LC_CTYPE=English_United States.1252
    ## [3] LC_MONETARY=English_United States.1252 LC_NUMERIC=C
    ## [5] LC_TIME=English_United States.1252
    ##
    ## attached base packages:
    ## [1] stats     graphics  grDevices utils     datasets  methods   base
    ##
    ## other attached packages:
    ## [1] ChemmineOB_1.30.0 fmcsR_1.34.0      ChemmineR_3.44.0  BiocStyle_2.20.0
    ##
    ## loaded via a namespace (and not attached):
    ##  [1] tidyselect_1.1.1    xfun_0.23           bslib_0.2.5.1       purrr_0.3.4
    ##  [5] colorspace_2.0-1    vctrs_0.3.8         generics_0.1.0      htmltools_0.5.1.1
    ##  [9] yaml_2.2.1          base64enc_0.1-3     utf8_1.2.1          rlang_0.4.11
    ## [13] jquerylib_0.1.4     pillar_1.6.1        glue_1.4.2          DBI_1.1.1
    ## [17] lifecycle_1.0.0     zlibbioc_1.38.0     stringr_1.4.0       munsell_0.5.0
    ## [21] gtable_0.3.0        htmlwidgets_1.5.3   codetools_0.2-18    evaluate_0.14
    ## [25] rsvg_2.1.2          knitr_1.33          parallel_4.1.0      fansi_0.4.2
    ## [29] highr_0.9           Rcpp_1.0.6          scales_1.1.1        DT_0.18
    ## [33] BiocManager_1.30.15 magick_2.7.2        jsonlite_1.7.2      gridExtra_2.3
    ## [37] rjson_0.2.20        ggplot2_3.3.3       png_0.1-7           digest_0.6.27
    ## [41] stringi_1.6.2       bookdown_0.22       dplyr_1.0.6         grid_4.1.0
    ## [45] tools_4.1.0         bitops_1.0-7        magrittr_2.0.1      sass_0.4.0
    ## [49] RCurl_1.98-1.3      tibble_3.1.2        crayon_1.4.1        pkgconfig_2.0.3
    ## [53] ellipsis_0.3.2      assertthat_0.2.1    rmarkdown_2.8       R6_2.5.0
    ## [57] compiler_4.1.0

# References

Backman, T W, Y Cao, and T Girke. 2011. “ChemMine tools: an online service for analyzing and clustering small molecules.” Nucleic Acids Res 39 (Web Server issue): 486–91. https://doi.org/10.1093/nar/gkr320.

Cao, Y, A Charisi, L C Cheng, T Jiang, and T Girke. 2008. “ChemmineR: a compound mining framework for R.” Bioinformatics 24 (15): 1733–4. https://doi.org/10.1093/bioinformatics/btn307.

Cao, Y, T Jiang, and T Girke. 2008. “A maximum common substructure-based algorithm for searching and predicting drug-like compounds.” Bioinformatics 24 (13): 366–74. https://doi.org/10.1093/bioinformatics/btn186.

Wang, Y, T W Backman, K Horan, and T Girke. 2013. “fmcsR: Mismatch Tolerant Maximum Common Substructure Searching in R.” Bioinformatics, August. https://doi.org/10.1093/bioinformatics/btt475.