Subject: CVE-2024-41003: bpf: Fix reg_set_min_max corruption of fake_reg

From: Greg Kroah-Hartman <[email-masked]>

Description
===========

In the Linux kernel, the following vulnerability has been resolved:

bpf: Fix reg_set_min_max corruption of fake_reg

Juan reported that after doing some changes to buzzer [0] and implementing
a new fuzzing strategy guided by coverage, they noticed the following in
one of the probes:

  [...]
  13: (79) r6 = *(u64 *)(r0 +0)         ; R0=map_value(ks=4,vs=8) R6_w=scalar()
  14: (b7) r0 = 0                       ; R0_w=0
  15: (b4) w0 = -1                      ; R0_w=0xffffffff
  16: (74) w0 >>= 1                     ; R0_w=0x7fffffff
  17: (5c) w6 &= w0                     ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff))
  18: (44) w6 |= 2                      ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd))
  19: (56) if w6 != 0x7ffffffd goto pc+1
  REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
  REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
  REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0)
  19: R6_w=0x7fffffff
  20: (95) exit

  from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  21: (14) w6 -= 2147483632             ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd))
  22: (76) if w6 s>= 0xe goto pc+1      ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd))
  23: (95) exit

  from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
  24: (14) w6 -= 14                     ; R6_w=0
  [...]

What can be seen here is a register invariant violation on line 19. After
the binary-or in line 18, the verifier knows that bit 2 is set but knows
nothing about the rest of the content which was loaded from a map value,
meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in
line 19 the verifier analyzes the branch, it splits the register states
in reg_set_min_max() into the registers of the true branch (true_reg1,
true_reg2) and the registers of the false branch (false_reg1, false_reg2).

Since the test is w6 != 0x7ffffffd, the src_reg is a known constant.
Internally, the verifier creates a "fake" register initialized as scalar
to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now,
for line 19, it is mathematically impossible to take the false branch of
this program, yet the verifier analyzes it. It is impossible because the
second bit of r6 will be set due to the prior or operation and the
constant in the condition has that bit unset (hex(fd) == binary(1111 1101).

When the verifier first analyzes the false / fall-through branch, it will
compute an intersection between the var_off of r6 and of the constant. This
is because the verifier creates a "fake" register initialized to the value
of the constant. The intersection result later refines both registers in
regs_refine_cond_op():

  [...]
  t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off));
  reg1->var_off = tnum_with_subreg(reg1->var_off, t);
  reg2->var_off = tnum_with_subreg(reg2->var_off, t);
  [...]

Since the verifier is analyzing the false branch of the conditional jump,
reg1 is equal to false_reg1 and reg2 is equal to false_reg2, i.e. the reg2
is the "fake" register that was meant to hold a constant value. The resulting
var_off of the intersection says that both registers now hold a known value
of var_off=(0x7fffffff, 0x0) or in other words: this operation manages to
make the verifier think that the "constant" value that was passed in the
jump operation now holds a different value.

Normally this would not be an issue since it should not influence the true
branch, however, false_reg2 and true_reg2 are pointers to the same "fake"
register. Meaning, the false branch can influence the results of the true
branch. In line 24, the verifier assumes R6_w=0, but the actual runtime
value in this case is 1. The fix is simply not passing in the same "fake"
register location as inputs to reg_set_min_max(), but instead making a
copy. Moving the fake_reg into the env also reduces stack consumption by
120 bytes. With this, the verifier successfully rejects invalid accesses
from the test program.

  [0] https://github.com/google/buzzer

The Linux kernel CVE team has assigned CVE-2024-41003 to this issue.

Affected and fixed versions
===========================

	Issue introduced in 6.8 with commit 67420501e868 and fixed in 6.9.7 with commit 41e8ab428a99
	Issue introduced in 6.8 with commit 67420501e868 and fixed in 6.10 with commit 92424801261d

Please see https://www.kernel.org for a full list of currently supported
kernel versions by the kernel community.

Unaffected versions might change over time as fixes are backported to
older supported kernel versions.  The official CVE entry at
	https://cve.org/CVERecord/?id=CVE-2024-41003
will be updated if fixes are backported, please check that for the most
up to date information about this issue.

Affected files
==============

The file(s) affected by this issue are:
	include/linux/bpf_verifier.h
	kernel/bpf/verifier.c

Mitigation
==========

The Linux kernel CVE team recommends that you update to the latest
stable kernel version for this, and many other bugfixes.  Individual
changes are never tested alone, but rather are part of a larger kernel
release.  Cherry-picking individual commits is not recommended or
supported by the Linux kernel community at all.  If however, updating to
the latest release is impossible, the individual changes to resolve this
issue can be found at these commits:
	https://git.kernel.org/stable/c/41e8ab428a9964df378fa45760a660208712145b
	https://git.kernel.org/stable/c/92424801261d1564a0bb759da3cf3ccd69fdf5a2