[SOLVED] Warning updating: about kbl_dmc_ver1.bin for module i915_bpo

[jb]

Hi.

When I updated easyvdr 3.0 I received this warning message:

Code:

W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1.bin for module i915_bpo

when update-initramfs was run.

In my desktop computer with a NUC6 I solved it with this script:

Code:

#!/bin/bash

cd

wget https://01.org/sites/default/files/downloads/intelr-graphics-linux/sklgucver61.tar.bz2 && \
tar xvjf sklgucver61.tar.bz2 && cd skl_guc_ver6_1/ && sudo ./install.sh

cd

wget https://01.org/sites/default/files/downloads/intelr-graphics-linux/kbldmcver101.tar.bz2 && \
tar xjvf kbldmcver101.tar.bz2 && cd kbl_dmc_ver1_01/ && sudo ./install.sh

cd

sudo update-initramfs -u -k all

obtained from this page: https://gist.github.com/zas/205372c824de...c2f86e1415

Can I run safely the script in easyvdr 3.0 without break its good behaviour?

Regards.
Javier B.

[mango]

Hi,

When I updated easyvdr 3.0 I received this warning message:

Code:

W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1.bin for module i915_bpo

This Firmware for "i915" on easyVDR-3.0(trusty) is installed!

Code:

[email protected]:/lib/firmware/i915# ll
insgesamt 460
drwxr-xr-x  2 root root   4096 Jan 24 16:20 ./
drwxr-xr-x 72 root root  36864 Jan 24 17:05 ../
-rw-r--r--  1 root root   5872 Dez  1 22:27 bxt_dmc_ver1_04.bin
-rw-r--r--  1 root root   5872 Dez  1 22:27 bxt_dmc_ver1_05.bin
-rw-r--r--  1 root root   8380 Dez  1 22:27 bxt_dmc_ver1_06.bin
lrwxrwxrwx  1 root root     19 Dez  1 22:27 bxt_dmc_ver1.bin -> bxt_dmc_ver1_06.bin
-rw-r--r--  1 root root   8824 Dez  1 22:24 skl_dmc_ver1_23.bin
-rw-r--r--  1 root root   8928 Dez  1 22:24 skl_dmc_ver1_26.bin
lrwxrwxrwx  1 root root     19 Dez  1 22:24 skl_dmc_ver1.bin -> skl_dmc_ver1_26.bin
-rw-r--r--  1 root root 109636 Dez  1 22:27 skl_guc_ver1_1059.bin
lrwxrwxrwx  1 root root     21 Dez  1 22:27 skl_guc_ver1.bin -> skl_guc_ver1_1059.bin
-rw-r--r--  1 root root 128320 Dez  1 22:27 skl_guc_ver4_3.bin
lrwxrwxrwx  1 root root     18 Dez  1 22:27 skl_guc_ver4.bin -> skl_guc_ver4_3.bin
-rw-r--r--  1 root root 129024 Dez  1 22:27 skl_guc_ver6_1.bin
lrwxrwxrwx  1 root root     18 Dez  1 22:27 skl_guc_ver6.bin -> skl_guc_ver6_1.bin

Firmware:

kbl_* -> Kabylake
skl_* -> Skylake
bxt_* -> Broxton

Only the "Kabylake" (HD 610/630) Driver is not installed!
https://01.org/linuxgraphics/downloads/k...e-dmc-1.01
My Opinion, you can install the Driver. ...Script reports when error!

Regards
Wolfgang

[jb]

Thanks, I will try it tomorrow.

Regards.

[jb]

Hi.

I have only installed the missing firmare (Kabylake). It seems the warning message has dissappeared and easyvdr 3.0 stable works fine as usual.

Thanks and regards.
Javier B.