2. TV-Karte nimmt Sender der anderen Polarisation auf

[Schwabe]

Hallo,

habe folgendes "Phänomen". Meine 2.TV-Karte nimmt nicht den Sender auf den ich möchte, sondern den, der anderen Polarisation mit gleicher Frequenz, PID,... .

Beispiel: Aufname Pro7 (Vertikal) -> Jobtv24 (Horizontal) wird aufgezeichnet.
Jedoch steht im Aufnahmeverzeichnis der Name der Pro7 Sendung.

Wer kann mir helfen, wo ich suchen bzw. was ich machen muß. Liegts evtl. an der Senderliste ?
Diseqc ist ausgeschalten.

Danke.


Gruß
Schwabe

[Schwabe]

So wie es aussieht, war die Senderliste schuld. Habe die geändert und seitdem paßt's wieder.

[Schwabe]

NEGATIV !!  >

Trotz originaler Easyvdr Senderliste hat der VDR gesten nacht nicht den gewünschten Sender aufgenommen.


!!  P L E A S E    H E L P  !!

[prudentis]

Hallo Schwabe,

deine 2.te Karte wird auch erkannt und ist Richtig eingebunden?
du solltest ein paar Logfiles anhängen (lspci, lsmod, dmesg, logread)


lg prudentis

[Schwabe]

Sodele, also zuerst lspci

Code:

VDR:~# lspci
0000:00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
0000:00:02.0 VGA compatible controller: Intel Corporation 82815 CGC [Chipset Graphics Controller] (rev 04)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 11)
0000:00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 11)
0000:00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 11)
0000:00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 11)
0000:00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 11)
0000:00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 11)
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio (rev 11)
0000:01:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
0000:01:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (rev 03)
0000:01:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
0000:01:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
0000:01:0f.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
0000:01:0f.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)

und dmesg nicht von ganz vorne:

Code:

mapped APIC to ffffd000 (01402000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 511420k/523200k available (4676k kernel code, 11296k reserved, 1326k data, 332k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1978.21 BogoMIPS (lpj=989105)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 0a
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0e20)
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd95e, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region f180-f1bf claimed by ICH4 GPIO
PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: Device [ECP] status [00000008]: functional but not present; setting present
ACPI: Device [GAME] status [00000008]: functional but not present; setting present
ACPI: Device [MIDI] status [00000008]: functional but not present; setting present
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
  IO window: 3000-3fff
  MEM window: f4100000-f6ffffff
  PREFETCH window: fc000000-fc0fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x69 set to 0x1
IA-32 Microcode Update Driver: v1.14a <[email protected]>
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 [email protected]).
NTFS driver 2.1.27 [Flags: R/W].
fuse init (API version 7.7)
JFS: nTxBlock = 3996, nTxLock = 31969
SGI XFS with ACLs, security attributes, realtime, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Console: switching to colour frame buffer device 80x30
I810FB: fb0         : Intel(R) 815 (Internal Graphics with AGP) Framebuffer Device v0.9.0
I810FB: Video RAM   : 4096K
I810FB: Monitor     : H: 29-30 KHz V: 60-60 Hz
I810FB: Mode        : [email protected]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 17
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x2400-0x2407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x2408-0x240f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST340016A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG SC-148P, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [email protected]
device-mapper: multipath: version 1.0.4 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: (supports S0 S1 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 332k freed
NET: Registered protocol family 1
Adding 266072k swap on /dev/hda1.  Priority:-1 extents:1 across:266072k
Linux video capture interface: v2.00
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
saa7146: found saa7146 @ mem e0b9e000 (revision 1, irq 10) (0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
adapter has MAC addr = 00:d0:5c:04:f3:11
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f22623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input1
dvb-ttpci: found av7110-0.
saa7146: register extension 'budget dvb'.
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ts: Compaq touchscreen protocol output
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 9, io base 0x00001c00
usb usb2: configuration #1 chosen from 1 choice
usb 1-2: new low speed USB device using uhci_hcd and address 2
cx2388x v4l2 driver version 0.0.6 loaded
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:01:0f.0[A] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
CORE cx88[0]: subsystem: 0070:9200, board: Hauppauge Nova-SE2 DVB-S [card=38,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
tveeprom 1-0050: Hauppauge model 92500, rev B1B1, serial# 575499
tveeprom 1-0050: MAC address is 00-0D-FE-08-C8-0B
tveeprom 1-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 1-0050: audio processor is CX883 (idx 32)
tveeprom 1-0050: decoder processor is CX883 (idx 22)
tveeprom 1-0050: has no radio, has no IR remote
cx88[0]: warning: unknown hauppauge model #92500
cx88[0]: hauppauge eeprom: model=92500
input: cx88 IR (Hauppauge Nova-SE2 DVB as /class/input/input3
cx88[0]/0: found at 0000:01:0f.0, rev: 5, irq: 9, latency: 165, mmio: 0xf5000000
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 00:30:05:23:16:B3
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
lirc_dev: IR Remote Control driver registered, at major 61
lirc_atiusb: no version for "lirc_unregister_plugin" found: kernel tainted.
lirc_atiusb: USB remote driver for LIRC $Revision: 1.60 $
lirc_atiusb: Paul Miller <[email protected]>
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_atiusb[2]: X10 Wireless Technology Inc USB Receiver on usb1:2
usbcore: registered new driver lirc_atiusb
cx2388x dvb driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:0f.2[A] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
cx88[0]/2: found at 0000:01:0f.2, rev: 5, irq: 9, latency: 64, mmio: 0xf6000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 1 (Conexant CX24123/CX24109)...
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
usbcore: deregistering driver lirc_atiusb
lirc_atiusb[2]: usb remote disconnected

lirc_atiusb: USB remote driver for LIRC $Revision: 1.60 $
lirc_atiusb: Paul Miller <[email protected]>
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_atiusb[2]: X10 Wireless Technology Inc USB Receiver on usb1:2
usbcore: registered new driver lirc_atiusb
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
cx88[0]: irq mpeg  [0x100000] ts_err?*
cx88[0]/2: general errors: 0x00100000
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout
cx88[0]/2: cx8802_timeout

weiter nächste Antwort ....

[Schwabe]

und weiter ... lsmod

Code:

VDR:~# lsmod
Module                  Size  Used by
ipv6                  260576  12
lirc_atiusb            19488  1
budget_av              19584  0
tda10021                7172  1 budget_av
budget_ci              17024  0
tda1004x               16132  2 budget_av,budget_ci
cx88_dvb               14724  24
cx8802                 12932  1 cx88_dvb
cx88_vp3054_i2c         4608  1 cx88_dvb
mt352                   7300  1 cx88_dvb
dvb_pll                14852  2 budget_av,cx88_dvb
or51132                10372  1 cx88_dvb
video_buf_dvb           6788  1 cx88_dvb
nxt200x                14852  1 cx88_dvb
isl6421                 2688  1 cx88_dvb
zl10353                 5764  1 cx88_dvb
cx24123                13192  1 cx88_dvb
lgdt330x                8732  1 cx88_dvb
cx22702                 6788  1 cx88_dvb
lirc_dev               15332  1 lirc_atiusb
eeprom                  7440  0
i2c_viapro              9108  0
usb_storage            85824  0
scsi_mod               93956  1 usb_storage
ehci_hcd               33800  0
ohci_hcd               21764  0
e100                   36232  0
mii                     6144  1 e100
cx8800                 35340  0
cx88xx                 63268  3 cx88_dvb,cx8802,cx8800
ir_common              28164  1 cx88xx
i2c_algo_bit            9352  2 cx88_vp3054_i2c,cx88xx
tsdev                   8128  0
uhci_hcd               24588  0
hwmon_vid               3456  0
i2c_isa                 5248  0
tveeprom               15248  1 cx88xx
compat_ioctl32          1536  1 cx8800
btcx_risc               5256  3 cx8802,cx8800,cx88xx
snd_via82xx            28696  0
gameport               15752  1 snd_via82xx
snd_ac97_codec         91936  1 snd_via82xx
snd_ac97_bus            2432  1 snd_ac97_codec
snd_pcm                82824  2 snd_via82xx,snd_ac97_codec
snd_timer              25220  1 snd_pcm
snd_page_alloc         10504  2 snd_via82xx,snd_pcm
snd_mpu401_uart         8704  1 snd_via82xx
snd_rawmidi            25504  1 snd_mpu401_uart
snd_seq_device          8588  1 snd_rawmidi
snd                    53604  7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore              10464  1 snd
budget                 11264  0
s5h1420                 9732  1 budget
psmouse                39048  0
budget_core            11524  3 budget_av,budget_ci,budget
dvb_ttpci             101828  4
lnbp21                  2560  3 budget_ci,budget,dvb_ttpci
l64781                  7684  2 budget,dvb_ttpci
tda8083                 6532  2 budget,dvb_ttpci
sp8870                  7948  1 dvb_ttpci
stv0297                 8448  2 budget_ci,dvb_ttpci
ttpci_eeprom            2816  2 budget_core,dvb_ttpci
saa7146_vv             51328  2 budget_av,dvb_ttpci
saa7146                18952  6 budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv
mt312                   8068  0
ves1820                 6788  2 budget,dvb_ttpci
stv0299                11400  4 budget_av,budget_ci,budget,dvb_ttpci
ves1x93                 7172  2 budget,dvb_ttpci
i2c_core               22032  34 budget_av,tda10021,budget_ci,tda1004x,cx88_dvb,mt352,dvb_pll,or51132,nxt200x,isl6421,zl10353,cx24123,lgdt330x,cx22702,eeprom,i2c_viapro,cx88xx,i2c_algo_bit,i2c_isa,tveeprom,budget,s5h1420,budget_core,dvb_ttpci,lnbp21,l64781,tda8083,sp8870,stv0297,ttpci_eeprom,mt312,ves1820,stv0299,ves1x93
dvb_core               82600  7 budget_av,budget_ci,video_buf_dvb,budget,budget_core,dvb_ttpci,stv0299
video_buf              25220  6 cx88_dvb,cx8802,video_buf_dvb,cx8800,cx88xx,saa7146_vv
videodev               25856  3 cx8800,cx88xx,saa7146_vv
v4l1_compat            13316  3 cx8800,saa7146_vv,videodev
v4l2_common            23040  3 cx8800,saa7146_vv,videodev
evdev                  10368  0
unix                   28464  16

und als letztes logread mit einer Aufnahme auf Pro7, welche jedoch richtig aufgenommen wurde.

Code:

VDR:~# logread
Feb 24 20:16:41 (none) syslog.info syslogd started: BusyBox v1.1.3
Feb 24 20:16:47 (none) user.notice input.agent[1642]:      tsdev: loaded successfully
Feb 24 20:16:53 (none) user.notice usb.agent[2044]:      lirc_atiusb: loaded successfully
Feb 24 20:16:54 (none) authpriv.info su[2126]: + ??? root:root
Feb 24 20:16:54 (none) auth.info su[2126]: (pam_unix) session opened for user root by (uid=0)
Feb 24 20:16:57 (none) auth.info sshd[2741]: Server listening on :: port 22.
Feb 24 20:16:57 (none) daemon.info init: Entering runlevel: 2
Feb 24 20:16:58 (none) authpriv.info su[2938]: + ??? root:root
Feb 24 20:16:58 (none) auth.info su[2938]: (pam_unix) session opened for user root by (uid=0)
Feb 24 20:17:00 (none) user.err vdr: [2938] ERROR: unknown config parameter: extrecmenu.ShowDvdNr = 0
Feb 24 20:17:00 (none) user.err vdr: [2938] osdteletext: no translation found for 'Play' in language 1 (Deutsch)
Feb 24 20:17:00 (none) user.err vdr: [2938] osdteletext: no translation found for 'FastFwd' in language 1 (Deutsch)
Feb 24 20:17:00 (none) user.err vdr: [2938] osdteletext: no translation found for 'FastRew' in language 1 (Deutsch)
Feb 24 20:17:01 (none) daemon.err nmbd[3014]: [2007/02/24 20:17:01, 0] param/loadparm.c:map_parameter(2470)
Feb 24 20:17:01 (none) daemon.err nmbd[3014]:   Unknown parameter encountered: "character set"
Feb 24 20:17:01 (none) daemon.err nmbd[3014]: [2007/02/24 20:17:01, 0] param/loadparm.c:lp_do_parameter(3152)
Feb 24 20:17:01 (none) daemon.err nmbd[3014]:   Ignoring unknown parameter "character set"
Feb 24 20:17:02 (none) daemon.err smbd[3041]: [2007/02/24 20:17:02, 0] param/loadparm.c:map_parameter(2470)
Feb 24 20:17:02 (none) daemon.err smbd[3041]:   Unknown parameter encountered: "character set"
Feb 24 20:17:02 (none) daemon.err smbd[3041]: [2007/02/24 20:17:02, 0] param/loadparm.c:lp_do_parameter(3152)
Feb 24 20:17:02 (none) daemon.err smbd[3041]:   Ignoring unknown parameter "character set"
Feb 24 20:17:04 (none) user.err vdr: [2938] weatherng: Parameter '-D' not set.  Set default value : /etc/vdr/plugins/weatherng
Feb 24 20:17:04 (none) user.err vdr: [2938] weatherng: Parameter '-I' not set.  Set default value : /etc/vdr/plugins/weatherng
Feb 24 20:17:04 (none) user.err vdr: [2938] weatherng: Parameter '-S' not set.  Set default value : /etc/vdr/plugins/weatherng
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Mark' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Unmark' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Mark all' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Unm. all' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'View' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Play' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Play' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Threads' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Sources' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Other' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] text2skin_DeepBlue: no translation found for 'Mute' in language 1 (Deutsch)
Feb 24 20:17:08 (none) user.err vdr: [2938] no translation found for 'System information plugin' in language 1 (Deutsch)
Feb 24 20:17:08 (none) user.err vdr: [2938] timeline: no translation found for 'Show timer overview and collisions' in language 1 (Deutsch)
Feb 24 20:17:08 (none) user.err vdr: [2938] tvonscreen: no translation found for 'Shows the EPG info in form of a typical TV magazine' in language 1 (Deutsch)
Feb 24 20:21:25 (none) auth.info sshd[3334]: Accepted keyboard-interactive/pam for root from ::ffff:192.168.0.3 port 1294 ssh2
Feb 24 20:21:25 (none) auth.info sshd[3337]: (pam_unix) session opened for user root by root(uid=0)
VDR:~# logread
Feb 24 20:16:41 (none) syslog.info syslogd started: BusyBox v1.1.3
Feb 24 20:16:47 (none) user.notice input.agent[1642]:      tsdev: loaded successfully
Feb 24 20:16:53 (none) user.notice usb.agent[2044]:      lirc_atiusb: loaded successfully
Feb 24 20:16:54 (none) authpriv.info su[2126]: + ??? root:root
Feb 24 20:16:54 (none) auth.info su[2126]: (pam_unix) session opened for user root by (uid=0)
Feb 24 20:16:57 (none) auth.info sshd[2741]: Server listening on :: port 22.
Feb 24 20:16:57 (none) daemon.info init: Entering runlevel: 2
Feb 24 20:16:58 (none) authpriv.info su[2938]: + ??? root:root
Feb 24 20:16:58 (none) auth.info su[2938]: (pam_unix) session opened for user root by (uid=0)
Feb 24 20:17:00 (none) user.err vdr: [2938] ERROR: unknown config parameter: extrecmenu.ShowDvdNr = 0
Feb 24 20:17:00 (none) user.err vdr: [2938] osdteletext: no translation found for 'Play' in language 1 (Deutsch)
Feb 24 20:17:00 (none) user.err vdr: [2938] osdteletext: no translation found for 'FastFwd' in language 1 (Deutsch)
Feb 24 20:17:00 (none) user.err vdr: [2938] osdteletext: no translation found for 'FastRew' in language 1 (Deutsch)
Feb 24 20:17:01 (none) daemon.err nmbd[3014]: [2007/02/24 20:17:01, 0] param/loadparm.c:map_parameter(2470)
Feb 24 20:17:01 (none) daemon.err nmbd[3014]:   Unknown parameter encountered: "character set"
Feb 24 20:17:01 (none) daemon.err nmbd[3014]: [2007/02/24 20:17:01, 0] param/loadparm.c:lp_do_parameter(3152)
Feb 24 20:17:01 (none) daemon.err nmbd[3014]:   Ignoring unknown parameter "character set"
Feb 24 20:17:02 (none) daemon.err smbd[3041]: [2007/02/24 20:17:02, 0] param/loadparm.c:map_parameter(2470)
Feb 24 20:17:02 (none) daemon.err smbd[3041]:   Unknown parameter encountered: "character set"
Feb 24 20:17:02 (none) daemon.err smbd[3041]: [2007/02/24 20:17:02, 0] param/loadparm.c:lp_do_parameter(3152)
Feb 24 20:17:02 (none) daemon.err smbd[3041]:   Ignoring unknown parameter "character set"
Feb 24 20:17:04 (none) user.err vdr: [2938] weatherng: Parameter '-D' not set.  Set default value : /etc/vdr/plugins/weatherng
Feb 24 20:17:04 (none) user.err vdr: [2938] weatherng: Parameter '-I' not set.  Set default value : /etc/vdr/plugins/weatherng
Feb 24 20:17:04 (none) user.err vdr: [2938] weatherng: Parameter '-S' not set.  Set default value : /etc/vdr/plugins/weatherng
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Mark' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Unmark' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Mark all' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Unm. all' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'View' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Play' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Play' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Threads' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Sources' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] filebrowser: no translation found for 'Other' in language 1 (Deutsch)
Feb 24 20:17:04 (none) user.err vdr: [2938] text2skin_DeepBlue: no translation found for 'Mute' in language 1 (Deutsch)
Feb 24 20:17:08 (none) user.err vdr: [2938] no translation found for 'System information plugin' in language 1 (Deutsch)
Feb 24 20:17:08 (none) user.err vdr: [2938] timeline: no translation found for 'Show timer overview and collisions' in language 1 (Deutsch)
Feb 24 20:17:08 (none) user.err vdr: [2938] tvonscreen: no translation found for 'Shows the EPG info in form of a typical TV magazine' in language 1 (Deutsch)
Feb 24 20:21:25 (none) auth.info sshd[3334]: Accepted keyboard-interactive/pam for root from ::ffff:192.168.0.3 port 1294 ssh2
Feb 24 20:21:25 (none) auth.info sshd[3337]: (pam_unix) session opened for user root by root(uid=0)
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[0]: noad
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[1]: nice
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[2]: --background
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[3]: --comments
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[4]: --ac3
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[5]: --overlap
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[6]: --jumplogo
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[7]: --OSD
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[8]: --statisticfile=//video0/noadstat
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[9]: before
Feb 24 20:28:10 (none) user.info noad[3388]: noad arg[10]: /video0/@Der_Appartement-Schreck/2007-02-24.20.28.50.99.rec
Feb 24 20:28:10 (none) user.info noad[3388]: noad args done
Feb 24 20:28:10 (none) user.info noad[3388]: noad called with 'before' and online=1 and liverecording is yes
Feb 24 20:28:10 (none) user.info noad[3388]: nothing to do yet
Feb 24 20:29:19 (none) user.err vdr: [2938] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:19 (none) user.err vdr: [2938] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:19 (none) user.err vdr: [2938] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:19 (none) user.err vdr: [2938] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:19 (none) user.err vdr: [2938] no translation found for 'SysInfo' in language 1 (Deutsch)
Feb 24 20:29:19 (none) user.err vdr: [2938] no translation found for 'SysInfo' in language 1 (Deutsch)
Feb 24 20:29:38 (none) user.err vdr: [2938] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:38 (none) user.err vdr: [2938] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:38 (none) user.err vdr: [2938] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:38 (none) user.err vdr: [2938] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:38 (none) user.err vdr: [2938] no translation found for 'SysInfo' in language 1 (Deutsch)
Feb 24 20:29:38 (none) user.err vdr: [2938] no translation found for 'SysInfo' in language 1 (Deutsch)
Feb 24 20:29:40 (none) user.err vdr: [2938] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:40 (none) user.err vdr: [2938] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:40 (none) user.err vdr: [2938] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:40 (none) user.err vdr: [2938] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:40 (none) user.err vdr: [2938] no translation found for 'SysInfo' in language 1 (Deutsch)
Feb 24 20:29:40 (none) user.err vdr: [2938] no translation found for 'SysInfo' in language 1 (Deutsch)
Feb 24 20:29:40 (none) user.err vdr: [3402] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:40 (none) user.err vdr: [3402] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:40 (none) user.err vdr: [3402] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:40 (none) user.err vdr: [3402] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:42 (none) user.err vdr: [3402] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:42 (none) user.err vdr: [3402] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:42 (none) user.err vdr: [3402] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:42 (none) user.err vdr: [3402] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:44 (none) user.err vdr: [3402] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:44 (none) user.err vdr: [3402] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:44 (none) user.err vdr: [3402] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:44 (none) user.err vdr: [3402] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:46 (none) user.err vdr: [3402] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:46 (none) user.err vdr: [3402] filebrowser: no translation found for 'Filebrowser' in language 1 (Deutsch)
Feb 24 20:29:46 (none) user.err vdr: [3402] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:46 (none) user.err vdr: [3402] mplayer: no translation found for 'Video-Player' in language 1 (Deutsch)
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[0]: noad
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[1]: nice
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[2]: --background
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[3]: --comments
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[4]: --ac3
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[5]: --overlap
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[6]: --jumplogo
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[7]: --OSD
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[8]: --statisticfile=//video0/noadstat
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[9]: after
Feb 24 20:29:46 (none) user.info noad[3404]: noad arg[10]: /video0/@Der_Appartement-Schreck/2007-02-24.20.28.50.99.rec
Feb 24 20:29:46 (none) user.info noad[3404]: noad args done
Feb 24 20:29:47 (none) user.info noad[3404]: noad forked to pid 3405
Feb 24 20:29:47 (none) user.info noad[3405]: Saturday,24.02.2007 20:29:47 start noad-0.6.0 for /video0/@Der_Appartement-Schreck/2007-02-24.20.28.50.99.rec

Mir fällt der cx88[0] -Fehler am Ende von dmesg auf. Könnte da was faul sein ?

Zu bemerken ist, daß der VDR mal Richtig und mal Falsch aufzeichnet. Hier muß ich noch beobachten, ob es mit dem Booten des PC's zusammenhängt oder ob es während des Betriebs auf einmal auftaucht.

Gruß
Schwabe

[wbreu]

Hallo schwabe,

schaut eventuell ganz nach einem IRQ-Konflikt aus.

Hast du diese Lösungsmöglichkeit hier schon probiert?

http://www.easy-vdr.de/forum/index.php?topic=1256.0

Die Ausgabe von cat /proc/interrupts wäre interessant, bitte mal posten.

Gruß
Wolfgang

[Schwabe]

Hallo Wolfgang,

anbei die Ausgabe:

Code:

VDR:~# cat /proc/interrupts
           CPU0
  0:    2786400          XT-PIC  timer
  1:          8          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  6:          3          XT-PIC  floppy
  8:          1          XT-PIC  rtc
  9:     635165          XT-PIC  acpi, cx88[0], eth0, cx88[0], uhci_hcd:usb1, uhci_hcd:usb2
10:    1184428          XT-PIC  saa7146 (0)
12:        130          XT-PIC  i8042
14:      12249          XT-PIC  ide0
15:         40          XT-PIC  ide1
NMI:          0
LOC:          0
ERR:          0
MIS:          0

IRQ9 sieht ziemlich "voll" aus. Ich werde mal in der lilo.conf wie beschrieben den Zusatz irqpoll einfügen.

Ich poste dann die Ausgabe ...


Gruß
Schwabe

[Schwabe]

So und hier habe ich nun die lilo.conf geändert. Und danach natürlich lilo ausgeführt.

Code:

VDR:/etc# cat lilo.conf
timeout = 10
prompt
default = VDR-2.6.18
boot = /dev/hda
lba32
compact


image=/boot/bzImage
        label=VDR-2.6.18
        optional
        root = /dev/hda3
        append = "apm=off elevator=cfq logs=0 acpi=on irqpoll"

image=/boot/memtest86.bin
        label=Memorytest

image = /boot/bzImage.poweroff
        label = PowerOff

# If you have another OS on this machine to boot, you can uncomment the
# following lines, changing the device name on the `other' line to
# where your other OS' partition is.
#
#other=/dev/hda2
#      label=Develop
      #restricted
      #alias=3

Jedoch zeigt cat /proc/interrupts immer noch folgendes:

Code:

VDR:/etc# cat /proc/interrupts
           CPU0
  0:     310202          XT-PIC  timer
  1:          1          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  6:          3          XT-PIC  floppy
  8:          1          XT-PIC  rtc
  9:      38608          XT-PIC  acpi, eth0, cx88[0], uhci_hcd:usb1, uhci_hcd:usb2, cx88[0]
10:     168235          XT-PIC  saa7146 (0)
12:        123          XT-PIC  i8042
14:      10342          XT-PIC  ide0
15:         40          XT-PIC  ide1
NMI:          0
LOC:          0
ERR:          0
MIS:          0

Also immer noch Doppelbelegung von IRQ9.
Was kann ich noch tun ??

[wbreu]

Hallo schwabe,

den Befehl lilo auf der Konsole hast du aber nach der Änderung in der lilo.conf gemacht, oder?

Gruß
Wolfgang

[Schwabe]

Hallo Wolfgang,

richtig.

Erst lilo.conf geändert, dann lilo in der konsole ausgeführt.