[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [pci] Speed grade 5 or 6



Hi Tadej,

thanks for the quick reply. I was just wondering because the MEMEC board uses 
speed grade 6.

Have a nice day,

Nico.

>X-Authentication-Warning: localhost.localdomain: majordomo set sender to 
owner-pci@opencores.org using -f
>From: "Tadej Markovic" <tadejm@flextronics.si>
>To: <pci@opencores.org>
>Subject: RE: [pci] Speed grade 5 or 6
>Date: Wed, 21 May 2003 15:10:39 +0200
>MIME-Version: 1.0
>Content-Transfer-Encoding: 7bit
>X-Priority: 3 (Normal)
>X-MSMail-Priority: Normal
>X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200
>Importance: Normal
>X-OriginalArrivalTime: 21 May 2003 13:31:20.0308 (UTC) 
FILETIME=[43B9C340:01C31F9D]
>
>Hi!
>
>We used XC2S150 with speed grade 5 and it works fine. Beside PCI bridge we
>also had CRT core inside.
>
>Regards,
>	Tadej
>
>
>> -----Original Message-----
>> From: owner-pci@opencores.org
>> [mailto:owner-pci@opencores.org]On Behalf
>> Of Nico Weling
>> Sent: 21. maj 2003 14:39
>> To: pci@opencores.org
>> Subject: [pci] Speed grade 5 or 6
>>
>>
>> Hi all,
>>
>> does the PCI bridge need to run on speed grade 6 or is it ok
>> to take Xilinx
>> XC2S200 with speed grade 5 (normal performance)?
>>
>> Thanks in advance!
>>
>> Nico.
>>
>>
>> --
>> To unsubscribe from pci mailing list please visit
>http://www.opencores.org/mailinglists.shtml
>
>
>--
>To unsubscribe from pci mailing list please visit 
http://www.opencores.org/mailinglists.shtml

__________________________________
Nico Weling
System Designer
Ericsson Eurolab Deutschland GmbH
Verification Tool Design

Tel: +49 2407 575 5217
Fax: +49 2407 575 651
Dect:+49 2407 575 89339
mailto:Nico.Weling@eed.ericsson.se
__________________________________


--
To unsubscribe from pci mailing list please visit http://www.opencores.org/mailinglists.shtml