[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [openrisc] problems with or1ksim




I obtain the same error.
This is the dump:
Reading script file from 'sim.cfg'...
WARNING: config.cpu: Invalid parameter: slp; ignoring.

WARNING: config.cpu: Invalid parameter: btic; ignoring.

WARNING: config.cpu: Invalid parameter: bpb; ignoring.

WARNING: config.uart: Invalid parameter: enabled; ignoring.

WARNING: config.dma: Invalid parameter: enabled; ignoring.

WARNING: config.base: Unknown section: tick; ignoring.
WARNING: config.base: Invalid parameter: =; ignoring.

WARNING: config.base: Invalid parameter: irq; ignoring.


Building automata... done, num uncovered: 0/212.
Parsing operands data... done.
loadcode: filename linux  startaddr=0  virtphy_transl=0
Not COFF file format
ELF type: 0x0002
ELF machine: 0x8472
ELF version: 0x00000001
ELF sec = 22
Section: .romvec, vaddr: 0xf0000000, paddr: 0xf0000000, offset:
0x00001000, size: 0x00000c14
Section: .text, vaddr: 0xf0002000, paddr: 0xf0002000, offset:
0x00002000, size: 0x0008c014
Section: .rodata, vaddr: 0xf008e014, paddr: 0xf008e014, offset:
0x0008e014, size: 0x00007b28
Section: .initrd, vaddr: 0xf0095b3c, paddr: 0xf0095b3c, offset:
0x00095b3c, size: 0x00035c00
Section: .data, vaddr: 0x00002000, paddr: 0xf00cb73c, offset:
0x000cc000, size: 0x00008bfc
Section: .ramvec, vaddr: 0x00000000, paddr: 0xf00d4338, offset:
0x000d5000, size: 0x00000c14
WARNING: UART0 has problems with RX file stream.
WARNING: Keyboard has problems with RX file stream.
Resetting PIC.
Resetting memory controller.
EXCEPTION: write out of memory (8-bit access to 90000002)
Violación de segmento (core dumped)


----- Original Message ----- 
From: Marko Mlinar <markom@o... > 
To: openrisc@o... , Nan Zhou <lavender_uc@y... > 
Date: Mon, 21 Oct 2002 08:35:49 +0200 
Subject: Re: [openrisc] problems with or1ksim 

> 
> 
> Hi! 
> 
> I was unable to reconstruct your problem, I have some 
> advices below, otherwise please send more detailed bug report. 
> 
> > WARNING: UARTO has problems with RX file stream. 
> > 
> > WARNING: Keyboard has problems with RX file system.) 
> It is possible that lack of uart0.rx or keyboard0.rx files cause 
> segmentation 
> fault. Please create the files and try if it helps. 
> 
> > The same problem happened when I ran or32-uclinux-sim from 
> > /opt/or32-uclinux/bin/ instead with inputing sim.cfg. But if 
> sim.cfg is not 
> > given here, I will get exception and when canceling it, I can 
> get into 
> > simulator as (sim). 
> Also try with sim "exit" and "dhry" binary. 
> 
> > I got confused why the configuration given in toolchains 
> instruction page, 
> > Architectural Simulator page, and the README file are 
> different. They are: 
> > ./configure --target=or32-uclinux --prefix=/opt/or32-uclinux 
> > ./configure --target=or32-rtems --prefix=/opt/or32-rtems 
> Depends on toolchain you have. 
> 
> > ./configure --target=or32-uclinux 
> > 
> > respectively. 
> > 
> > I wonder if there're different simulators for RTL and 
> architecture level. 
> > Also, the README mentions there're drhy.or32 test file under 
> testbench 
> > directory but I can't find it. 
> Yes, it was renamed to "dhry", but README was not yet updated. 
> 
> hope this helps, 
> Marko 
> 
--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml