Package: 6to4tunnel Version: 0.1 Depends: menu-tiny, iproute Section: comm Architecture: arm Maintainer: Jamey Hicks MD5Sum: 3134ca96527307f0e05c4553d38612f5 Size: 1711 Filename: ./6to4tunnel_0.1_arm.ipk Description: Starts and stops IPv6 6to4 tunnels Package: althea Version: 0.5.2 Architecture: arm Maintainer: tom.lawler@compaq.com MD5Sum: a240bca1ba8e3ff952a39c5144eaf1f7 Size: 119758 Filename: ./althea_0.5.2_arm.ipk Description: IMAP and POP3 mail client Package: backpaq-firmware Version: 2.0 Architecture: arm Maintainer: Brian Avery MD5Sum: 06c97a4cf3ec43fa030f84fef30fe015 Size: 111872 Filename: ./backpaq-firmware_2.0_arm.ipk Description: BackPAQ FPGA firmware Package: bigcam Version: 1.1 Depends: backpaq-firmware, hotplug, libgtk1.2 Architecture: arm Maintainer: Andrew Christian MD5Sum: 80f30480e4908d27e2d66234041cc76f Size: 32231 Filename: ./bigcam_1.1_arm.ipk Description: BackPAQ Camera Application for Bigcam cameras Package: camtest Version: 1.1 Depends: backpaq-firmware Architecture: arm Maintainer: Andrew Christian MD5Sum: 8e14b90d2f7e16e0ccbaf70f0616a373 Size: 18027 Filename: ./camtest_1.1_arm.ipk Description: BackPAQ experimental camera application for cameras Package: eeprom-tools Version: 1.5 Depends: python,backpaq-modules,pygtk Section: admin Architecture: arm Maintainer: Andrew Christian MD5Sum: fcf92ef350cf4da153d95aeee778ed3f Size: 57631 Filename: ./eeprom-tools_1.5_arm.ipk Description: EEPROM burning tools for the iPAQ Package: familiar-base Version: demo5 Depends: sysvinit (>= 2.72) Architecture: arm Maintainer: Jamey Hicks MD5Sum: 40981efcbbb6ae3727c9c4ad4a0ba712 Size: 17072 Filename: ./familiar-base_demo5_arm.ipk Description: essential files for a familiar installation This package is a bit of a catch-all for files that need to be installed with familiar, (I made this package from everything that was still left over after I split off the rest of the files from familiar v0.4 bleeding into their own packages) . Much of what it is here is simply emty directories that must exist. Also, there are some files here which may be created by scripts in Debian that we are not yet runnging. There are probably several files here that should move to other packages. Package: freenet6 Version: 0.7a-2 Depends: iproute Section: networking Architecture: arm Maintainer: Jamey Hicks MD5Sum: 8f2a9c446d23dd0c9473e0699f790a3c Size: 23971 Filename: ./freenet6_0.7a-2_arm.ipk Description: IPv6 Tunnel Setup Protocol Package: gcardinfo Version: 1.1 Depends: libgtk1.2, pcmcia-cs, libstdc++2.10-glibc2.2 Section: admin Architecture: arm Maintainer: Andrew Christian MD5Sum: b2fe7813dae98573f15c51685486cd73 Size: 94870 Filename: ./gcardinfo_1.1_arm.ipk Description: Gtk interface to basic PCMCIA card services Package: h3600-utils Version: 1.0 Depends: libc6 Section: admin Architecture: arm Maintainer: Carl Worth , Andrew Christian MD5Sum: 11960f5f7b4b8ebe5d8a558c4abb5de6 Size: 9378 Filename: ./h3600-utils_1.0_arm.ipk Description: utilities for controlling hardware on Compaq iPAQ computers\n This package contains programs for controlling the backlight, contrast (sic)\n as well as the leds on the Compaq iPAQ H3100/H3600/H3700 series of handheld computers Package: handy-utils Version: 2.1 Section: extras Architecture: arm Maintainer: steven.ayer@compaq.com MD5Sum: 2e814fd0dffaef041ac4e90c519dd2f1 Size: 47344 Filename: ./handy-utils_2.1_arm.ipk Description: just two things most count on: more, find Package: hotplug Version: 1.16 Section: base Architecture: arm Maintainer: Jamey Hicks MD5Sum: fa53336adc365fcdcbb8927f16ea2e13 Size: 6091 Filename: ./hotplug_1.16_arm.ipk Description: Hotplug add/removal scripts for H3600 Package: ical-outlook Version: 0.0 Depends: python Section: libs Architecture: arm Maintainer: Neil Reynolds (Neil.Reynolds@hp.com) MD5Sum: ecca204404575987273b3390b0c2be2d Size: 1067062 Filename: ./ical-outlook_0.0_arm.ipk Description: python utility for accessing outlook calendar entries Package: ipkg Version: 0.9-demo6 Depends: fileutils, shellutils, textutils, sed, grep, gzip, tar, wget Section: base Architecture: arm Maintainer: Carl Worth MD5Sum: f5b6619c36f64e0fcf60ada627dae36d Size: 12540 Filename: ./ipkg_0.9-demo6_arm.ipk Description: Lightweight package management system Package: iproute Version: 2.2.4-now-ss991023-1 Depends: libc6 (>= 2.2.1-2) Section: net Architecture: arm Maintainer: Jamey Hicks MD5Sum: c1b8ab9ad5953443bdf3c9b703f840c1 Size: 39124 Filename: ./iproute_2.2.4-now-ss991023-1_arm.ipk Description: This package includes the important tools for controlling the network subsystem of the Linux kernel. It unifies the control of links, addresses, routes, rules, and tunnels into the ip command. Package: ipv6web-bits Version: 1.0 Depends: familiar v0.4 Architecture: arm Maintainer: steven.ayer@compaq.com MD5Sum: 9d213321fe4c528cbb42d50924aa48a3 Size: 452242 Filename: ./ipv6web-bits_1.0_arm.ipk Description: highly stripped ipv6-compliant apache tree, ipv6 w3m Package: landcam Version: 1.3 Depends: backpaq-firmware, hotplug, libgtk1.2, libjpeg62, libpng2 Architecture: arm Maintainer: Andrew Christian MD5Sum: c8154b92f8c7b098b18e18caa4cd4367 Size: 23081 Filename: ./landcam_1.3_arm.ipk Description: BackPAQ Camera Application for Landscape cameras Package: libfreetype6 Version: 2.0.1.20010317-2 Depends: libc6 (>= 2.2.1-2) Suggests: libfreetype6-dev Section: libs Architecture: arm Maintainer: Carl Worth MD5Sum: 11419a0f521ee5974935290257300bb3 Size: 211470 Filename: ./libfreetype6_2.0.1.20010317-2_arm.ipk Description: FreeType 2 font engine, shared library files. The FreeType project is a team of volunteers who develop free, portable and high-quality software solutions for digital typography. They specifically target embedded systems and focus on bringing small, efficient and ubiquitous products. . The FreeType 2 library is their new software font engine. It has been designed to provide the following important features: * A universal and simple API to manage font files * Support for several font formats through loadable modules * High-quality anti-aliasing * High portability & performance . Supported font formats include: * TrueType files (.ttf) and collections (.ttc) * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format * Type 1 Multiple Master fonts. The FreeType 2 API also provides routines to manage design instances easily * Type 1 CID-keyed fonts * OpenType/CFF (.otf) fonts * CFF/Type 2 fonts * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with the Adobe SVG viewer plugin. * Windows FNT/FON bitmap fonts . This package contains the files needed to run programs that use the FreeType 2 library. . Home Page: http://www.freetype.org/ Authors: David Turner Robert Wilhelm Werner Lemberg Package: libgdk-pixbuf Version: 0.9.0 Depends: libglib1.2 Architecture: arm Maintainer: Andrew Christian MD5Sum: 90099c078035c405359d27de33273422 Size: 503282 Filename: ./libgdk-pixbuf_0.9.0_arm.ipk Description: The GDK-pixbuf library of image manipulation routines. Package: libgpmg1 Version: 1.19.3-6 Depends: libc6 (>= 2.2.1-2), libncurses5 Suggests: gpm Section: libs Architecture: arm Maintainer: Zephaniah E. Hull MD5Sum: f3ce480a07b8a7debe393d2289b83655 Size: 11397 Filename: ./libgpmg1_1.19.3-6_arm.ipk Description: General Purpose Mouse Library [libc6] This package provides a library that handles mouse requests and delivers them to applications. Package: libpcap-dev Version: 0.6.2-1 Depends: libpcap0 (= 0.6.2-1), libc6-dev Section: devel Architecture: arm Maintainer: Torsten Landschoff MD5Sum: c0c53aef502c55852db16f4b65b6f229 Size: 65316 Filename: ./libpcap-dev_0.6.2-1_arm.ipk Description: Development library for libpcap. Includes headers, static libraries, and documentation. Package: libpcap0 Version: 0.6.2-1 Depends: libc6 (>= 2.2.1-2) Section: net Architecture: arm Maintainer: Torsten Landschoff MD5Sum: e8b24bc70b0631fc71b4148ae24e27a5 Size: 51791 Filename: ./libpcap0_0.6.2-1_arm.ipk Description: System interface for user-level packet capture. libpcap (Packet CAPture) provides a portable framework for low-level network monitoring. Applications include network statistics collection, security monitoring, network debugging, etc. . Since almost every system vendor provides a different interface for packet capture, and since there are several tools that require this functionality, we've created this system-independent API to ease in porting and to alleviate the need for several system-dependent packet capture modules in each application. . Further information is available at Package: madplay-bleed Version: 0.13.0b Architecture: arm Maintainer: Greg Berenfield MD5Sum: 2eb26b3711df93ae2c35ea1141b3d9e5 Size: 136277 Filename: ./madplay-bleed_0.13.0b_arm.ipk Description: mp3 player (latest version) and madtime song length utility Package: mipv6-bits Version: 3.7 Depends: iproute Section: net Architecture: arm Maintainer: steven.ayer@compaq.com MD5Sum: 8d71cb387662943a45d57dffdf16941a Size: 38651 Filename: ./mipv6-bits_3.7_arm.ipk Description: Software pieces necessary to configure and operate unit as a mipv6 node. Package: ohphone Version: 0.0-4 Depends: rxvt, menu-tiny Section: comm Architecture: arm Maintainer: Jamey Hicks MD5Sum: 27f37516ac9253673cbefaef1c5014c0 Size: 2810367 Filename: ./ohphone_0.0-4_arm.ipk Description: H.323 Voice and Video Conferencing Package: oneko Version: 1.5 Architecture: arm Maintainer: Andrew Christian MD5Sum: dbc16a5fed42c5b30f8ded9652474ef9 Size: 27189 Filename: ./oneko_1.5_arm.ipk Description: Chase the mouse demo for the Mercury BackPAQ Package: pcmcia-cs Version: 0.0-fam3-1 Depends: libc6 (>= 2.2.1-2), modutils, psmisc Suggests: pcmcia-modules, xlibs (>= 4.0.1-11) Architecture: arm Maintainer: Jamey Hicks MD5Sum: f5a953626ccca76bd47a6cd42f03b9c1 Size: 57533 Filename: ./pcmcia-cs_0.0-fam3-1_arm.ipk Description: PCMCIA Card Services for Linux. NOTE: I couldn't find this package in Debian/arm so I just grabbed the control file from my Debian/i386 and combined it with the pcmcia-cs bits from familiar v0.4 bleeding. A better solution would be to rebuild the real .deb from the pcmcia-cs source. . PCMCIA cards are commonly used in laptops to provide expanded capabilities, such as modems, increased memory, etc. Some desktop PCs can accept PCMCIA cards as well, although this is rare. . Card Services for Linux is a complete PCMCIA support package. It includes a set of client drivers for specific cards, and a card manager daemon that can respond to card insertion and removal events, loading and unloading drivers on demand. It supports ``hot swapping'' of PCMCIA cards, so cards can be inserted and ejected at any time. . The actual kernel modules required for this package are contained in the pcmcia-modules- package, where is the version of the kernel for which the modules have been compiled. Package: ping6 Version: 1.0 Depends: none Architecture: arm Maintainer: steven.ayer@compaq.com MD5Sum: 677f6c11dce2aa24fc3827ce6f8b2ab7 Size: 14123 Filename: ./ping6_1.0_arm.ipk Description: ipv6 compliant ping Package: ppp Version: 2.4.2b1 Depends: libc6 (>= 2.1.2), libpam0g, libpam-modules, netbase, sysvinit (>= 2.75-4) Suggests: debconf Section: base Architecture: arm Maintainer: Steve Ayer MD5Sum: 3f7cb5bfbc805cad22297579f3d73bf1 Size: 220006 Filename: ./ppp_2.4.2b1_arm.ipk Description: Point-to-Point Protocol (PPP) daemon. The Point-to-Point Protocol (PPP) provides a standard way to transmit datagrams over a serial link, as well as a standard way for the machines at either end of the link (the "peers") to negotiate various optional characteristics of the link. Using PPP, a serial link can be used to transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections between the peers. . This package contains pppd with PAM support built-in, so `ppp-pam' package is obsolete. Package: procps-kill Version: 1:2.0.7-4 Depends: libc6 (>= 2.2.1-2), libncurses5 Section: base Architecture: arm Maintainer: Craig Small MD5Sum: 7f9e026dfc2ed0a646b767eadbcda3e1 Size: 6634 Filename: ./procps-kill_2.0.7-4_arm.ipk Description: The /proc file system utilities. The kill command from the full Debian procps package. Package: profiling-daemon Version: 1.1 Architecture: arm Maintainer: Debby Wallach MD5Sum: 9d9c2f9e225840983cc5f2b67b98150a Size: 22972 Filename: ./profiling-daemon_1.1_arm.ipk Description: Daemon for the sampling profile for ARM Linux Package: psmisc Version: 20.1-1 Depends: libc6 (>= 2.2.1-2), libncurses5 (>= 5.2.20010310-1) Section: base Architecture: arm Maintainer: Craig Small MD5Sum: 6af057f7985ead8a0b7ea13d9e273426 Size: 33634 Filename: ./psmisc_20.1-1_arm.ipk Description: Utilities that use the proc filesystem This package contains three little utilities that use the proc FS: . `fuser' identifies processes using files (similar to Sun's or SGI's fuser). `killall' kills processes by name, e.g. killall -HUP named. `pstree' shows the currently running processes as a tree Package: securecam Version: 1.1 Depends: backpaq-firmware, hotplug, libgtk1.2, libjpeg62, libpng2, soappy Section: graphics Architecture: arm Maintainer: Andrew Christian MD5Sum: bc5e6d4e17311b0407125f9c65d6ac37 Size: 35884 Filename: ./securecam_1.1_arm.ipk Description: BackPAQ Security camera application for Landscape cameras Package: setserial Version: 2.17-20 Depends: libc6 (>= 2.2.1-2) Section: base Architecture: arm Maintainer: Gordon Russell MD5Sum: 9179daecefd131c1a8167cab81ac552e Size: 10881 Filename: ./setserial_2.17-20_arm.ipk Description: Controls configuration of serial ports. Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. Package: syslog Version: 1.0 Section: admin Architecture: arm Maintainer: Andrew Christian MD5Sum: d0fc9ad849cf9a70bf5c1373574970df Size: 28058 Filename: ./syslog_1.0_arm.ipk Description: System logging (syslog) functions Package: sysset Version: 0.0-1 Depends: python, libglade0 Section: admin Architecture: arm Maintainer: Carl Worth MD5Sum: 2c5bf12960af750da3938887fa6832c2 Size: 8777 Filename: ./sysset_0.0-1_arm.ipk Description: python utility for configuring system settings Package: task-bootstrap Version: 0.6-1 Depends: ssh, ppp, kernel-modules-2.4.4-rmk3-np1, pcmcia-modules-2.4.4-rmk3-np1, wireless-tools, pump, hotplug Architecture: arm Maintainer: Jamey Hicks MD5Sum: b9c6f9d48803ea9a7c85090a690e5ad6 Size: 1165 Filename: ./task-bootstrap_0.6-1_arm.ipk Description: Everything you might need to bootstrap a minimal ipkg system. Package: task-demo-complete Version: 5 Depends: ion, menu-tiny, xstroke, hotplug, oneko, checkers, dosfstools, h3600-utils, libglade0, libpopt0, libxaw6, libxml1, libxmltok1, loadmeter, netcat, ntpdate, procps, psmisc, ppp, pump, rsync, ssh, sysset, task-mp3-player, task-wireless, task-x, landcam, xaccel, eeprom-tools Section: extras Architecture: arm Maintainer: Jamey Hicks MD5Sum: a5733df923d48ae064f7386778e2e65c Size: 816 Filename: ./task-demo-complete_5_arm.ipk Description: Task package for a complete Mercury project demo system Package: task-familiar-complete Version: 0.5-fam2 Depends: task-bootstrap, apmd, checkers, dosfstools, fscrib, h3600-utils, libglade0, libpopt0, libxaw6, libxml1, libxmltok1, loadmeter, ncurses-base, netcat, ntpdate, pcmcia-modules-2.4.6-rmk1-np2-fam4, procps, ppp, pump, pyditor, qiv, rsync, ssh, sysset, xvkbd, task-mp3-player, task-games, task-wireless, task-x Architecture: arm Maintainer: Carl Worth MD5Sum: cfd796766f3fc4e221e871e78777144a Size: 832 Filename: ./task-familiar-complete_0.5-fam2_arm.ipk Description: Task package for a complete familiar system Package: task-mipv6-phase1-demo Version: 2 Depends: hotplug, oneko, checkers, dosfstools, fscrib, h3600-utils, libglade0, libpopt0, libxaw6, libxml1, libxmltok1, loadmeter, ncurses-base, netcat, ntpdate, pcmcia-modules-2.4.3-rmk2-np1, procps, ppp, pump, pyditor, qiv, rsync, ssh, sysset, xvkbd, task-mp3-player, task-games, task-wireless, task-x, landcam, xaccel, mipv6-bits, ping6, telnet6, wget6, bash Architecture: arm Maintainer: Jamey Hicks MD5Sum: 27a81b43ec42a0a3df8623e248e3e942 Size: 1933 Filename: ./task-mipv6-phase1-demo_2_arm.ipk Description: Task package for a complete IPv6 Mobility phase1 demo system . See http://rock.crl.dec.com:8080/mipv6/wiki/Phase1%20Demo for info. Package: task-mipv6-phase2-development Version: 1 Depends: hotplug, oneko, checkers, dosfstools, fscrib, h3600-utils, libglade0, libpopt0, libxaw6, libxml1, libxmltok1, loadmeter, ncurses-base, netcat, ntpdate, pcmcia-modules-2.4.6-rmk1-np2-mipv6, procps, ppp, pump, pyditor, qiv, rsync, ssh, sysset, xvkbd, task-mp3-player, task-games, task-wireless, task-x, landcam, xaccel, mipv6-bits, ping6, bash Architecture: arm Maintainer: Jamey Hicks MD5Sum: 4191c9d12d9da23b80352d0c86536849 Size: 1880 Filename: ./task-mipv6-phase2-development_1_arm.ipk Description: Task package for a complete IPv6 Mobility phase2 development system Package: tcpdump Version: 3.6.2-1 Depends: libc6 (>= 2.2.1-2), libpcap0 (<< 0.7.0), libpcap0 (>= 0.6.1-1) Section: net Architecture: arm Maintainer: Torsten Landschoff MD5Sum: f650c756d25d983646fb870deb7d57b0 Size: 136488 Filename: ./tcpdump_3.6.2-1_arm.ipk Description: A powerful tool for network monitoring and data acquisition This program allows you to dump the traffic on a network. tcpdump is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet types. . It can be used to print out the headers of packets on a network interface, filter packets that match a certain expression. You can use this tool to track down network problems, to detect "ping attacks" or to monitor network activities. More information is at Package: telnet6 Version: 1.0 Depends: none Architecture: arm Maintainer: steven.ayer@compaq.com MD5Sum: 22f1d6d9f6804fd95a4140f5f40c26e9 Size: 40862 Filename: ./telnet6_1.0_arm.ipk Description: ipv6 compliant telnet Package: vic Version: 2.8ucl-1.1.3-ipv6-3 Depends: libc6, xlibs, menu-tiny, iproute Section: comm Architecture: arm Maintainer: Carl Worth , Jamey Hicks MD5Sum: 03d8543cd9dcb738c614e952c4286cff Size: 1707783 Filename: ./vic_2.8ucl-1.1.3-ipv6-3_arm.ipk Description: Video conferencing tool with ipv6 support Package: wget6 Version: 1.0 Depends: none Architecture: arm Maintainer: steven.ayer@compaq.com MD5Sum: 146f6df39cded9870587600edd477d4f Size: 68070 Filename: ./wget6_1.0_arm.ipk Description: ipv6 compliant wget Package: wireless-tools Version: 21-1.0 Depends: libc6 (>= 2.2.1-2) Section: net Architecture: arm Maintainer: Carl Worth MD5Sum: 5f7515c8bc9f1ee8d7e25f92cf4e25b9 Size: 17201 Filename: ./wireless-tools_21-1.0_arm.ipk Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . The tools in this package only work with kernel versions 2.2.14 and above, and 2.3.24 and above. Package: xaccel Version: 0.4 Depends: libc6, xlibs, xserver-tiny-h3600 Section: x11 Architecture: arm Maintainer: Jim Gettys MD5Sum: ebba3e6ce35e915dedf892aef5c6cfc8 Size: 3988 Filename: ./xaccel_0.4_arm.ipk Description: Control the screen orientation by using the BackPAQ accelerometer. This program is meant to run in the background and control the orientation of the screen using the BackPAQ accelerometer. It does slight amounts of smoothing to reduce the likelyhood of transients. If it can't open the accelerometer it will sleep for 10 seconds before it tries again. .