[gelöst] Ton erst nach initctl start easyvdr-alsa-restore

[obelix]

Hi,

nach einem Mainboard defekt habe ich meine bestehende Installation in den neuen VDR umgezogen. Das neuen Mainboard hat SPDIF Onboard und somit ändert sich gegenüber der alten Installation die Soundkarte. Diese bekomme ich nicht wirklich in den Griff. Erst wenn nach einem

Code:

initctl start easyvdr-alsa-restore

ist der Ton da. Ich sehe nach einem reboot im Alsamixer, dass SPDIF gemutet ist. Auffällig ist auch die verlängerte Bootzeit und folgende Meldungen im Syslog:

Code:

Mar 11 17:54:18 vdr rpc.mountd[2737]: Version 1.2.8 starting
Mar 11 17:54:18 vdr postfix/master[2840]: daemon started -- version 2.11.0, configuration /etc/postfix
Mar 11 17:54:19 vdr after-vdr-hooks: executing /usr/share/vdr/after-vdr-hooks/46_skindesigner_refresh_temp
Mar 11 17:54:19 vdr avahi-daemon[1109]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::2e56:dcff:fe96:1488.
Mar 11 17:54:19 vdr avahi-daemon[1109]: New relevant interface eth0.IPv6 for mDNS.
Mar 11 17:54:19 vdr avahi-daemon[1109]: Registering new address record for fe80::2e56:dcff:fe96:1488 on eth0.*.
Mar 11 17:54:19 vdr Program-Changer: start up Version 5.6
Mar 11 17:54:19 vdr Program-Changer: Screen Resolution: Width: 1920 Height 1080
Mar 11 17:54:19 vdr ModemManager[2188]: <warn>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:19.0': not supported by any plugin
Mar 11 17:54:20 vdr after-vdr-hooks: executing /usr/share/vdr/after-vdr-hooks/99_disable-power-switch-rules
Mar 11 17:54:20 vdr kernel: [   21.264974] init: easyvdr-vdr post-start process (1451) terminated with status 1
Mar 11 17:54:20 vdr kernel: [   21.278811] init: easyvdr-create-ramdisk main process (2955) killed by TERM signal
Mar 11 17:54:21 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:21 vdr lircd-0.9.0[1432]: accepted new client on /var/run/lirc/lircd
Mar 11 17:54:21 vdr Program-Changer: Lirc initialization ready
Mar 11 17:54:22 vdr pulseaudio[2984]: [pulseaudio] client-conf-x11.c: xcb_connection_has_error() liefert »true«
Mar 11 17:54:22 vdr dbus[862]: [system] Activating service name='org.freedesktop.RealtimeKit1' (using servicehelper)
Mar 11 17:54:22 vdr dbus[862]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Mar 11 17:54:22 vdr rtkit-daemon[2989]: Successfully called chroot.
Mar 11 17:54:22 vdr rtkit-daemon[2989]: Successfully dropped privileges.
Mar 11 17:54:22 vdr rtkit-daemon[2989]: Successfully limited resources.
Mar 11 17:54:22 vdr rtkit-daemon[2989]: Running.
Mar 11 17:54:22 vdr rtkit-daemon[2989]: Watchdog thread running.
Mar 11 17:54:22 vdr rtkit-daemon[2989]: Canary thread running.
Mar 11 17:54:22 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:23 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:23 vdr kernel: [   24.787688] init: plymouth-stop pre-start process (3101) terminated with status 1
Mar 11 17:54:24 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:24 vdr easyvdr-autostart: wait for network initialization
Mar 11 17:54:23 vdr ntpdate[2149]: step time server 91.189.89.199 offset -0.504124 sec
Mar 11 17:54:24 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:25 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:26 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:27 vdr NetworkManager[2253]: <info> WiFi hardware radio set enabled
Mar 11 17:54:27 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:28 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:28 vdr easyvdr-autostart: wait for x11
Mar 11 17:54:29 vdr pulseaudio[2987]: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.Spawn.ExecFailed: //bin/dbus-launch terminated abnormally with the following error: Autolaunch error: X11 initialization failed.
Mar 11 17:54:29 vdr pulseaudio[2987]: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.Spawn.ExecFailed: //bin/dbus-launch terminated abnormally with the following error: Autolaunch error: X11 initialization failed.
Mar 11 17:54:29 vdr vdr: audio/alsa: supports pause: yes
Mar 11 17:54:29 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:30 vdr easyvdr-autostart: starting easyvdr-power-save
Mar 11 17:54:30 vdr easyvdr-autostart: set homedir perms started
Mar 11 17:54:30 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:31 vdr easyvdr-autostart: set homedir perms finished
Mar 11 17:54:31 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:32 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:33 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:34 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:35 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:36 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:37 vdr NetworkManager[2253]: <info> (eth0): IP6 addrconf timed out or failed.
Mar 11 17:54:37 vdr NetworkManager[2253]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Mar 11 17:54:37 vdr NetworkManager[2253]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Mar 11 17:54:37 vdr NetworkManager[2253]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Mar 11 17:54:37 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:38 vdr ntpdate[3210]: adjust time server 91.189.89.199 offset -0.000154 sec
Mar 11 17:54:38 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:39 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:40 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:41 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:42 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:43 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:44 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:45 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:46 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:47 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:48 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:49 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:50 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:51 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:52 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:53 vdr ntpdate[3333]: adjust time server 91.189.89.199 offset -0.000273 sec
Mar 11 17:54:53 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:54 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:55 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:56 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:57 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:58 vdr easyvdr-systemstart: wait for vdr
Mar 11 17:54:58 vdr easyvdr-systemstart: Wait more than 40 seconds for VDR - give up
Mar 11 17:54:58 vdr kernel: [   60.587537] init: easyvdr-systemstart main process (1146) terminated with status 1
Mar 11 17:55:00 vdr CRON[3418]: (easyvdr) CMD (/home/easyvdr/bin/vdrtranscode_status.sh > /dev/null 2>&1)
Mar 11 17:55:03 vdr view-picture: exit
Mar 11 17:55:14 vdr vdr: audio:  44100Hz supports 1 2 3 4 5 6 7 8 channels
Mar 11 17:55:14 vdr vdr: audio:  48000Hz supports 1 2 3 4 5 6 7 8 channels
Mar 11 17:55:14 vdr vdr: audio: 192000Hz supports 1 2 3 4 5 6 7 8 channels
Mar 11 17:55:15 vdr vdr: video/vdpau: VDPAU API version: 1
Mar 11 17:55:15 vdr vdr: video/vdpau: VDPAU information: NVIDIA VDPAU Driver Shared Library  340.96  Sun Nov  8 22:09:55 PST 2015
Mar 11 17:55:15 vdr vdr: video/vdpau: highest supported high quality scaling 1
Mar 11 17:55:15 vdr vdr: video/vdpau: feature deinterlace temporal supported
Mar 11 17:55:15 vdr vdr: video/vdpau: feature deinterlace temporal spatial supported
Mar 11 17:55:15 vdr vdr: video/vdpau: attribute skip chroma deinterlace supported
Mar 11 17:55:15 vdr vdr: video/vdpau: 4:2:0 chroma format with 4096x4096 supported
Mar 11 17:55:15 vdr vdr: video/vdpau: 4:2:2 chroma format with 4096x4096 supported
Mar 11 17:55:15 vdr vdr: video/vdpau: 8bit BGRA format with 16384x16384 supported
Mar 11 17:55:15 vdr vdr: video/vdpau: 10bit RGBA format with 16384x16384 supported
Mar 11 17:55:15 vdr vdr: [softhddev] ready

Die komplette easyinfo hänge ich an.

Danke und Gruß

Obelix

[obelix]

hmmmm, irgendwie sieht das ganze nicht gut aus:

Code:

Mar 11 18:28:57 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:28:57 vdr vdr: [2070] [softhddev]Clear:
Mar 11 18:28:57 vdr vdr: audio: flush out of ring buffers
Mar 11 18:28:57 vdr vdr: [2070] [softhddev]StillPicture: ts 0x7ffe38b8e5d0 3384
Mar 11 18:28:57 vdr vdr: [2070] [softhddev]StillPicture: pes 0x44c2110 2800
Mar 11 18:28:57 vdr vdr: video: get hwaccel context, not supported
Mar 11 18:28:57 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:28:57 vdr vdr: [2070] [softhddev]Clear:
Mar 11 18:28:57 vdr vdr: audio: flush out of ring buffers
Mar 11 18:28:57 vdr vdr: [2070] [softhddev]StillPicture: ts 0x7ffe38b8e5d0 31020
Mar 11 18:28:57 vdr vdr: [2070] [softhddev]StillPicture: pes 0x98cc8f0 27763
Mar 11 18:28:57 vdr vdr: video: get hwaccel context, not supported
Mar 11 18:28:57 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:28:57 vdr vdr: [2070] [softhddev]Clear:
Mar 11 18:28:57 vdr vdr: audio: flush out of ring buffers
Mar 11 18:28:57 vdr vdr: [2070] [softhddev]StillPicture: ts 0x7ffe38b8e5d0 131976
Mar 11 18:28:57 vdr vdr: [2070] [softhddev]StillPicture: pes 0xebeb190 118812
Mar 11 18:28:57 vdr vdr: video: get hwaccel context, not supported
Mar 11 18:28:57 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:28:57 vdr vdr: [2070] [softhddev]Clear:
Mar 11 18:28:58 vdr vdr: audio: flush out of ring buffers
Mar 11 18:28:58 vdr vdr: [2070] [softhddev]StillPicture: ts 0x7ffe38b8e5d0 112424
Mar 11 18:28:58 vdr vdr: [2070] [softhddev]StillPicture: pes 0xec39ae0 99927
Mar 11 18:28:58 vdr vdr: video: get hwaccel context, not supported
Mar 11 18:28:58 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:28:58 vdr vdr: [2070] [softhddev]Clear:
Mar 11 18:28:58 vdr vdr: audio: flush out of ring buffers
Mar 11 18:28:58 vdr vdr: [2070] [softhddev]StillPicture: ts 0x7ffe38b8e5d0 80276
Mar 11 18:28:58 vdr vdr: [2070] [softhddev]StillPicture: pes 0xe6b6de0 70225
Mar 11 18:28:58 vdr vdr: video: get hwaccel context, not supported
Mar 11 18:28:58 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:28:58 vdr vdr: [2070] [softhddev]Clear:
Mar 11 18:28:58 vdr vdr: audio: flush out of ring buffers
Mar 11 18:28:58 vdr vdr: [2070] [softhddev]StillPicture: ts 0x7ffe38b8e5d0 34404
Mar 11 18:28:58 vdr vdr: [2070] [softhddev]StillPicture: pes 0x98cd170 29939
Mar 11 18:28:58 vdr vdr: video: get hwaccel context, not supported
Mar 11 18:28:58 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:29:00 vdr vdr: [2070] [softhddev]Clear:
Mar 11 18:29:00 vdr vdr: audio: flush out of ring buffers
Mar 11 18:29:00 vdr vdr: [2070] [softhddev]StillPicture: ts 0x7ffe38b8e5d0 80276
Mar 11 18:29:00 vdr vdr: [2070] [softhddev]StillPicture: pes 0xe6b6de0 70225
Mar 11 18:29:00 vdr vdr: video: get hwaccel context, not supported
Mar 11 18:29:00 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:29:00 vdr vdr: [2070] [softhddev]Clear:
Mar 11 18:29:00 vdr vdr: audio: flush out of ring buffers
Mar 11 18:29:00 vdr vdr: [2070] [softhddev]StillPicture: ts 0x7ffe38b8e5d0 112424
Mar 11 18:29:00 vdr vdr: [2070] [softhddev]StillPicture: pes 0xecd90f0 99927
Mar 11 18:29:00 vdr vdr: video: get hwaccel context, not supported
Mar 11 18:29:00 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:29:01 vdr vdr: [2070] [softhddev]Clear:
Mar 11 18:29:01 vdr vdr: audio: flush out of ring buffers
Mar 11 18:29:01 vdr vdr: [2070] [softhddev]StillPicture: ts 0x7ffe38b8e5d0 131976
Mar 11 18:29:01 vdr vdr: [2070] [softhddev]StillPicture: pes 0xecd90f0 118812
Mar 11 18:29:01 vdr vdr: video: get hwaccel context, not supported
Mar 11 18:29:01 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:29:01 vdr vdr: video: decoder buffer empty, duping frame (3283/4) 0 v-buf
Mar 11 18:29:01 vdr vdr: video/vdpau: missed frame (39/4)
Mar 11 18:29:01 vdr vdr: video: decoder buffer empty, duping frame (3284/4) 0 v-buf
Mar 11 18:29:01 vdr vdr: video: 14:02:53.121+8888    0   0/\ms   0+0 v-buf
Mar 11 18:29:01 vdr vdr: [2070] [softhddev]Clear:
Mar 11 18:29:01 vdr vdr: audio: flush out of ring buffers
Mar 11 18:29:01 vdr vdr: [2070] [softhddev]StillPicture: ts 0x7ffe38b8e5d0 31020
Mar 11 18:29:01 vdr vdr: [2070] [softhddev]StillPicture: pes 0x98cc8f0 27763
Mar 11 18:29:01 vdr vdr: video: get hwaccel context, not supported
Mar 11 18:29:01 vdr vdr: codec/video: ffmpeg/libav buggy: width or height zero
Mar 11 18:29:04 vdr vdr: [2070] [softhddev]Clear:

Gruß

Obelix

[michel8]

Hallo Obelix,


Wenn du das Gefühl hast, dass der alsamixer nicht richtig eingestellt ist, dann Versuch im Audiosetup doch mal in den erweiterten Einstellungen die händische Einstellung vom Mixer...
Gruß
Michel

[obelix]

Guten Morgen Michel,

Hallo Obelix,


Wenn du das Gefühl hast, dass der alsamixer nicht richtig eingestellt ist, dann Versuch im Audiosetup doch mal in den erweiterten Einstellungen die händische Einstellung vom Mixer...
Gruß
Michel

das hatte ich bereits. Ich habe aber verdrängt, dass Pulseaudio unter Version 2.5 durchaus zwei oder drei Anläufe benötigen kann. Nach dem dritten Mal lief es dann.

Gruß

Obelix